Urban Replace Curb Gutter 2

C3D UrbanReplaceCurbGutter2 — RCG1 with a fixed sod tie (no rehab chain)

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`UrbanReplaceCurbGutter2`
Geometry	11 points, 11 links, 2 shapes
Conditional geometry	10 of the points are created inside a branch — which ones appear depends on the parameters and the target surface

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`FlangePointOffset`	number (metres unless the description says otherwise)	3	Attach to flange (m)
`SodSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.02	Fixed sod tie slope
`DimensionA`	number (metres unless the description says otherwise)	0.175	Flange to curb underside (m)
`DimensionB`	number (metres unless the description says otherwise)	0.4	Flange to flowline (m)
`DimensionC`	number (metres unless the description says otherwise)	0.025	Flowline depression (m)
`DimensionD`	number (metres unless the description says otherwise)	0.15	Curb rise (m)
`DimensionE`	number (metres unless the description says otherwise)	0.2	Flowline to curb back (m)
`DimensionF`	number (metres unless the description says otherwise)	0.15	Curb face width (m)
`DimensionG`	number (metres unless the description says otherwise)	0.325	Curb back drop (m)
`SubbaseDepth`	number (metres unless the description says otherwise)	0.45	Subbase depth at the flange (m)
`SubbaseExt`	number (metres unless the description says otherwise)	0.3	Subbase extension (m)
`SubbaseSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Subbase bottom slope (SE fallback)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`P0`	—	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P1` conditional	Flange	offset + elevation delta from the reference point	P0	`SideFlangePointOffset / SWY-SodSlope(abs(Side*FlangePointOffset-SWX)-DimensionB-DimensionE)-DimensionD+DimensionC`
`P2` conditional	Flowline_Gutter	offset + elevation delta from the reference point	P1	`-Side*DimensionB / -DimensionC`
`P3` conditional	Top_Curb	offset + elevation delta from the reference point	P2	`-Side*(DimensionE-DimensionF) / DimensionD`
`P4` conditional	Back_Curb	offset + elevation delta from the reference point	P2	`-Side*DimensionE / DimensionD`
`P5` conditional	—	offset + elevation delta from the reference point	P4	`0 / -DimensionG`
`P6` conditional	—	offset + elevation delta from the reference point	P1	`0 / -DimensionA`
`P7` conditional	—	offset + elevation delta from the reference point	P1	`0 / -SubbaseDepth`
`P9` conditional	—	offset + elevation delta from the reference point	P6	`-Side(DimensionB+DimensionE+SubbaseExt) / (DimensionB+DimensionE+SubbaseExt)(DimensionA-DimensionC+DimensionD-DimensionG)/(DimensionB+DimensionE)`
`P8` conditional	—	offset + elevation delta from the reference point	P7	`0-Side(DimensionB+DimensionE+SubbaseExt-P9.Y/300) / (DimensionB+DimensionE+SubbaseExt-P9.Y/300)SubbaseSlope`
`P10` conditional	—	offset + elevation delta from the reference point	P0	`SWX / SWY`

Links

Link	Code	Between	Role
`L1`	Curb,Top	P1 → P2	drawn
`L2`	Curb,Top	P2 → P3	drawn
`L3`	Curb,Top	P3 → P4	drawn
`L4`	Curb,Datum	P4 → P5	drawn
`L5`	Curb	P5 → P6	drawn
`L6`	Curb	P6 → P1	drawn
`L7`	Datum,SubBase	P8 → P7	drawn
`L8`	Datum	P9 → P8	drawn
`L9`	Datum	P5 → P9	drawn
`L10`	—	P7 → P6	drawn
`L11`	Top,Datum,Sod	P4 → P10	drawn

Shapes (materials)

Shape	Material code	Boundary points
`SC`	Curb	P1, P2, P3, P4, P5, P6
`SS`	SubBase	P6, P5, P9, P8, P7

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.