Trench With Pipe

C3D TrenchWithPipe — trench box + 40-segment drain pipe

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Miscellaneous
Civil 3D equivalent	`TrenchWithPipe`
Geometry	88 points, 84 links, 2 shapes
Targets	1 (surface / offset / elevation targets this subassembly can be linked to)

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`AttachmentPoint`	number (metres unless the description says otherwise)	2	0 Top centre / 1 Bottom centre / 2 Top corner
`BottomWidth`	number (metres unless the description says otherwise)	1	Trench bottom width (m)
`TopWidth`	number (metres unless the description says otherwise)	1.5	Trench top width (m)
`Depth`	number (metres unless the description says otherwise)	2	Trench depth (m, DepthProfile fallback)
`BeddingDepth`	number (metres unless the description says otherwise)	0.6	Pipe bedding over the trench bottom (m)
`DrainPipeDiameter`	number (metres unless the description says otherwise)	0.6	Drain pipe inner diameter (m)
`PipeThickness`	number (metres unless the description says otherwise)	0.1	Pipe wall thickness (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`A`	—	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P4`	Drain_Top_Inside	offset + elevation delta from the reference point	A	`if(AttachmentPoint<=1.5,-Side*TopWidth/2,0) / if(AttachmentPoint<=0.5,0,if(AttachmentPoint<=1.5,EffDepth,0))`
`P3`	Drain_Top_Outside	offset + elevation delta from the reference point	P4	`Side*TopWidth / 0`
`P1`	Drain_Bottom	offset + elevation delta from the reference point	P4	`Side*TopWidth/2 / -EffDepth`
`P5`	Drain_Bottom_Inside	offset + elevation delta from the reference point	P1	`-Side*BottomWidth/2 / 0`
`P2`	Drain_Top_Outside	offset + elevation delta from the reference point	P1	`Side*BottomWidth/2 / 0`
`P6`	Drain_Center	offset + elevation delta from the reference point	P1	`0 / BeddingDepth+DrainPipeDiameter/2+PipeThickness`
`P7`	Flow_Line	offset + elevation delta from the reference point	P6	`0 / -DrainPipeDiameter/2`
`CI0`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)1 / (DrainPipeDiameter/2)0`
`CI1`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.9877 / (DrainPipeDiameter/2)0.1564`
`CI2`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.9511 / (DrainPipeDiameter/2)0.309`
`CI3`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.891 / (DrainPipeDiameter/2)0.454`
`CI4`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.809 / (DrainPipeDiameter/2)0.5878`
`CI5`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.7071 / (DrainPipeDiameter/2)0.7071`
`CI6`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.5878 / (DrainPipeDiameter/2)0.809`
`CI7`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.454 / (DrainPipeDiameter/2)0.891`
`CI8`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.309 / (DrainPipeDiameter/2)0.9511`
`CI9`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.1564 / (DrainPipeDiameter/2)0.9877`
`CI10`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0 / (DrainPipeDiameter/2)1`
`CI11`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.1564 / (DrainPipeDiameter/2)0.9877`
`CI12`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.309 / (DrainPipeDiameter/2)0.9511`
`CI13`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.454 / (DrainPipeDiameter/2)0.891`
`CI14`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.5878 / (DrainPipeDiameter/2)0.809`
`CI15`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.7071 / (DrainPipeDiameter/2)0.7071`
`CI16`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.809 / (DrainPipeDiameter/2)0.5878`
`CI17`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.891 / (DrainPipeDiameter/2)0.454`
`CI18`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.9511 / (DrainPipeDiameter/2)0.309`
`CI19`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.9877 / (DrainPipeDiameter/2)0.1564`
`CI20`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-1 / (DrainPipeDiameter/2)0`
`CI21`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.9877 / (DrainPipeDiameter/2)-0.1564`
`CI22`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.9511 / (DrainPipeDiameter/2)-0.309`
`CI23`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.891 / (DrainPipeDiameter/2)-0.454`
`CI24`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.809 / (DrainPipeDiameter/2)-0.5878`
`CI25`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.7071 / (DrainPipeDiameter/2)-0.7071`
`CI26`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.5878 / (DrainPipeDiameter/2)-0.809`
`CI27`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.454 / (DrainPipeDiameter/2)-0.891`
`CI28`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.309 / (DrainPipeDiameter/2)-0.9511`
`CI29`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0.1564 / (DrainPipeDiameter/2)-0.9877`
`CI30`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)-0 / (DrainPipeDiameter/2)-1`
`CI31`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.1564 / (DrainPipeDiameter/2)-0.9877`
`CI32`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.309 / (DrainPipeDiameter/2)-0.9511`
`CI33`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.454 / (DrainPipeDiameter/2)-0.891`
`CI34`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.5878 / (DrainPipeDiameter/2)-0.809`
`CI35`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.7071 / (DrainPipeDiameter/2)-0.7071`
`CI36`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.809 / (DrainPipeDiameter/2)-0.5878`
`CI37`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.891 / (DrainPipeDiameter/2)-0.454`
`CI38`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.9511 / (DrainPipeDiameter/2)-0.309`
`CI39`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2)0.9877 / (DrainPipeDiameter/2)-0.1564`
`CO0`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)1 / (DrainPipeDiameter/2+PipeThickness)0`
`CO1`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.9877 / (DrainPipeDiameter/2+PipeThickness)0.1564`
`CO2`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.9511 / (DrainPipeDiameter/2+PipeThickness)0.309`
`CO3`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.891 / (DrainPipeDiameter/2+PipeThickness)0.454`
`CO4`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.809 / (DrainPipeDiameter/2+PipeThickness)0.5878`
`CO5`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.7071 / (DrainPipeDiameter/2+PipeThickness)0.7071`
`CO6`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.5878 / (DrainPipeDiameter/2+PipeThickness)0.809`
`CO7`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.454 / (DrainPipeDiameter/2+PipeThickness)0.891`
`CO8`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.309 / (DrainPipeDiameter/2+PipeThickness)0.9511`
`CO9`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.1564 / (DrainPipeDiameter/2+PipeThickness)0.9877`
`CO10`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0 / (DrainPipeDiameter/2+PipeThickness)1`
`CO11`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.1564 / (DrainPipeDiameter/2+PipeThickness)0.9877`
`CO12`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.309 / (DrainPipeDiameter/2+PipeThickness)0.9511`
`CO13`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.454 / (DrainPipeDiameter/2+PipeThickness)0.891`
`CO14`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.5878 / (DrainPipeDiameter/2+PipeThickness)0.809`
`CO15`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.7071 / (DrainPipeDiameter/2+PipeThickness)0.7071`
`CO16`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.809 / (DrainPipeDiameter/2+PipeThickness)0.5878`
`CO17`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.891 / (DrainPipeDiameter/2+PipeThickness)0.454`
`CO18`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.9511 / (DrainPipeDiameter/2+PipeThickness)0.309`
`CO19`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.9877 / (DrainPipeDiameter/2+PipeThickness)0.1564`
`CO20`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-1 / (DrainPipeDiameter/2+PipeThickness)0`
`CO21`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.9877 / (DrainPipeDiameter/2+PipeThickness)-0.1564`
`CO22`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.9511 / (DrainPipeDiameter/2+PipeThickness)-0.309`
`CO23`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.891 / (DrainPipeDiameter/2+PipeThickness)-0.454`
`CO24`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.809 / (DrainPipeDiameter/2+PipeThickness)-0.5878`
`CO25`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.7071 / (DrainPipeDiameter/2+PipeThickness)-0.7071`
`CO26`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.5878 / (DrainPipeDiameter/2+PipeThickness)-0.809`
`CO27`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.454 / (DrainPipeDiameter/2+PipeThickness)-0.891`
`CO28`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.309 / (DrainPipeDiameter/2+PipeThickness)-0.9511`
`CO29`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0.1564 / (DrainPipeDiameter/2+PipeThickness)-0.9877`
`CO30`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)-0 / (DrainPipeDiameter/2+PipeThickness)-1`
`CO31`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.1564 / (DrainPipeDiameter/2+PipeThickness)-0.9877`
`CO32`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.309 / (DrainPipeDiameter/2+PipeThickness)-0.9511`
`CO33`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.454 / (DrainPipeDiameter/2+PipeThickness)-0.891`
`CO34`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.5878 / (DrainPipeDiameter/2+PipeThickness)-0.809`
`CO35`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.7071 / (DrainPipeDiameter/2+PipeThickness)-0.7071`
`CO36`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.809 / (DrainPipeDiameter/2+PipeThickness)-0.5878`
`CO37`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.891 / (DrainPipeDiameter/2+PipeThickness)-0.454`
`CO38`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.9511 / (DrainPipeDiameter/2+PipeThickness)-0.309`
`CO39`	—	offset + elevation delta from the reference point	P6	`(DrainPipeDiameter/2+PipeThickness)0.9877 / (DrainPipeDiameter/2+PipeThickness)-0.1564`

Links

Link	Code	Between	Role
`L1`	Top,Drain_Top	P4 → P3	drawn
`L4`	Datum,Drain_Bottom	P3 → P2	drawn
`L3`	Datum,Drain_Bottom	P2 → P5	drawn
`L2`	Datum,Drain_Bottom	P5 → P4	drawn
`LCI0`	—	CI0 → CI1	drawn
`LCI1`	—	CI1 → CI2	drawn
`LCI2`	—	CI2 → CI3	drawn
`LCI3`	—	CI3 → CI4	drawn
`LCI4`	—	CI4 → CI5	drawn
`LCI5`	—	CI5 → CI6	drawn
`LCI6`	—	CI6 → CI7	drawn
`LCI7`	—	CI7 → CI8	drawn
`LCI8`	—	CI8 → CI9	drawn
`LCI9`	—	CI9 → CI10	drawn
`LCI10`	—	CI10 → CI11	drawn
`LCI11`	—	CI11 → CI12	drawn
`LCI12`	—	CI12 → CI13	drawn
`LCI13`	—	CI13 → CI14	drawn
`LCI14`	—	CI14 → CI15	drawn
`LCI15`	—	CI15 → CI16	drawn
`LCI16`	—	CI16 → CI17	drawn
`LCI17`	—	CI17 → CI18	drawn
`LCI18`	—	CI18 → CI19	drawn
`LCI19`	—	CI19 → CI20	drawn
`LCI20`	—	CI20 → CI21	drawn
`LCI21`	—	CI21 → CI22	drawn
`LCI22`	—	CI22 → CI23	drawn
`LCI23`	—	CI23 → CI24	drawn
`LCI24`	—	CI24 → CI25	drawn
`LCI25`	—	CI25 → CI26	drawn
`LCI26`	—	CI26 → CI27	drawn
`LCI27`	—	CI27 → CI28	drawn
`LCI28`	—	CI28 → CI29	drawn
`LCI29`	—	CI29 → CI30	drawn
`LCI30`	—	CI30 → CI31	drawn
`LCI31`	—	CI31 → CI32	drawn
`LCI32`	—	CI32 → CI33	drawn
`LCI33`	—	CI33 → CI34	drawn
`LCI34`	—	CI34 → CI35	drawn
`LCI35`	—	CI35 → CI36	drawn
`LCI36`	—	CI36 → CI37	drawn
`LCI37`	—	CI37 → CI38	drawn
`LCI38`	—	CI38 → CI39	drawn
`LCI39`	—	CI39 → CI0	drawn
`LCO0`	—	CO0 → CO1	drawn
`LCO1`	—	CO1 → CO2	drawn
`LCO2`	—	CO2 → CO3	drawn
`LCO3`	—	CO3 → CO4	drawn
`LCO4`	—	CO4 → CO5	drawn
`LCO5`	—	CO5 → CO6	drawn
`LCO6`	—	CO6 → CO7	drawn
`LCO7`	—	CO7 → CO8	drawn
`LCO8`	—	CO8 → CO9	drawn
`LCO9`	—	CO9 → CO10	drawn
`LCO10`	—	CO10 → CO11	drawn
`LCO11`	—	CO11 → CO12	drawn
`LCO12`	—	CO12 → CO13	drawn
`LCO13`	—	CO13 → CO14	drawn
`LCO14`	—	CO14 → CO15	drawn
`LCO15`	—	CO15 → CO16	drawn
`LCO16`	—	CO16 → CO17	drawn
`LCO17`	—	CO17 → CO18	drawn
`LCO18`	—	CO18 → CO19	drawn
`LCO19`	—	CO19 → CO20	drawn
`LCO20`	—	CO20 → CO21	drawn
`LCO21`	—	CO21 → CO22	drawn
`LCO22`	—	CO22 → CO23	drawn
`LCO23`	—	CO23 → CO24	drawn
`LCO24`	—	CO24 → CO25	drawn
`LCO25`	—	CO25 → CO26	drawn
`LCO26`	—	CO26 → CO27	drawn
`LCO27`	—	CO27 → CO28	drawn
`LCO28`	—	CO28 → CO29	drawn
`LCO29`	—	CO29 → CO30	drawn
`LCO30`	—	CO30 → CO31	drawn
`LCO31`	—	CO31 → CO32	drawn
`LCO32`	—	CO32 → CO33	drawn
`LCO33`	—	CO33 → CO34	drawn
`LCO34`	—	CO34 → CO35	drawn
`LCO35`	—	CO35 → CO36	drawn
`LCO36`	—	CO36 → CO37	drawn
`LCO37`	—	CO37 → CO38	drawn
`LCO38`	—	CO38 → CO39	drawn
`LCO39`	—	CO39 → CO0	drawn

Shapes (materials)

Shape	Material code	Boundary points
`S1`	Drain_Structure	P4, P3, P2, P5
`S2`	Drain_Area	CI0, CI1, CI2, CI3, CI4, CI5, CI6, CI7, CI8, CI9, CI10, CI11, CI12, CI13, CI14, CI15, CI16, CI17, CI18, CI19, CI20, CI21, CI22, CI23, CI24, CI25, CI26, CI27, CI28, CI29, CI30, CI31, CI32, CI33, CI34, CI35, CI36, CI37, CI38, CI39

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.