Side Ditch With Lid

C3D SideDitchWithLid — covered ditch box + lid slab

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`SideDitchWithLid`
Geometry	23 points, 20 links, 2 shapes

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`DitchBottomWidth`	number (metres unless the description says otherwise)	1	Ditch bottom width (m)
`InsideWallThickness`	number (metres unless the description says otherwise)	0.6	Inside wall thickness at bottom (m)
`OutsideWallThickness`	number (metres unless the description says otherwise)	0.6	Outside wall thickness at bottom (m)
`DitchOpeningAtLid`	number (metres unless the description says otherwise)	2	Ditch opening at the lid (m)
`InsideWallThicknessAtLid`	number (metres unless the description says otherwise)	0.45	Inside wall thickness at the lid (m)
`DitchBedDepth`	number (metres unless the description says otherwise)	0.6	Bed (bottom slab) depth (m)
`DitchDepth`	number (metres unless the description says otherwise)	2	Clear ditch depth (m)
`InsideLidDepth`	number (metres unless the description says otherwise)	0.6	Lid depth at the inside edge (m)
`OutsideLidDepth`	number (metres unless the description says otherwise)	0.45	Lid depth at the outside edge (m)
`LidGapToOpening`	number (metres unless the description says otherwise)	0	Gap between lid and opening (m)
`OutsideWallThicknessAtLid`	number (metres unless the description says otherwise)	0.45	Outside wall thickness at the lid (m)
`OutsideHingePointDepth`	number (metres unless the description says otherwise)	0	Outside hinge point depth (m)
`InsideDaylightSlope`	cross slope as a ratio (−0.02 = 2 % fall)	1	Inside daylight slope (rise/run)
`InsideBenchWidth`	number (metres unless the description says otherwise)	1.5	Inside bench width (m)
`InsideBenchSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.04	Inside bench slope
`InsideDaylightWidth`	number (metres unless the description says otherwise)	1	Inside daylight width (m)
`OutsideDaylightWidth`	number (metres unless the description says otherwise)	1	Outside daylight width (m)
`OutsideDaylightSlope`	cross slope as a ratio (−0.02 = 2 % fall)	1.5	Outside daylight slope (rise/run)
`OutsideBenchWidth`	number (metres unless the description says otherwise)	0.04	Outside bench width (m)
`OutsideBenchSlope`	cross slope as a ratio (−0.02 = 2 % fall)	1	Outside bench slope

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`P19`	—	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P20`	—	offset + elevation delta from the reference point	P19	`SideInsideDaylightWidth / -InsideDaylightWidthabs(InsideDaylightSlope)`
`P1`	Ditch_In,Ditch_Back	offset + elevation delta from the reference point	P20	`SideInsideBenchWidth / -InsideBenchWidthabs(InsideBenchSlope)`
`P2`	Ditch_Lid_Face	offset + elevation delta from the reference point	P1	`Side*InsideWallThicknessAtLid / 0`
`P5`	—	offset + elevation delta from the reference point	P2	`0 / -(InsideLidDepth+LidGapToOpening)`
`P3`	Ditch_Lid_Face	offset + elevation delta from the reference point	P1	`Side*(InsideWallThicknessAtLid+DitchOpeningAtLid) / -(InsideLidDepth-OutsideLidDepth)`
`P4`	Ditch_Back	offset + elevation delta from the reference point	P3	`Side*OutsideWallThicknessAtLid / 0`
`P10`	—	offset + elevation delta from the reference point	P3	`0 / -(OutsideLidDepth+LidGapToOpening)`
`P11`	—	offset + elevation delta from the reference point	P1	`Side(InsideWallThicknessAtLid+DitchOpeningAtLid+OutsideWallThicknessAtLid-InsideWallThickness-DitchBottomWidth-OutsideWallThickness)(InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)/((InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)+(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)) / -(InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)`
`P12`	—	offset + elevation delta from the reference point	P4	`-Side(InsideWallThicknessAtLid+DitchOpeningAtLid+OutsideWallThicknessAtLid-InsideWallThickness-DitchBottomWidth-OutsideWallThickness)(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)/((InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)+(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)) / -(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)`
`P7`	—	offset + elevation delta from the reference point	P11	`Side*InsideWallThickness / DitchBedDepth`
`P8`	—	offset + elevation delta from the reference point	P12	`-Side*OutsideWallThickness / DitchBedDepth`
`P6`	—	offset + elevation delta from the reference point	P7	`-Side(InsideWallThicknessAtLid+DitchOpeningAtLid+OutsideWallThicknessAtLid-InsideWallThickness-DitchBottomWidth-OutsideWallThickness)DitchDepth/((InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)+(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)) / DitchDepth`
`P9`	—	offset + elevation delta from the reference point	P8	`Side(InsideWallThicknessAtLid+DitchOpeningAtLid+OutsideWallThicknessAtLid-InsideWallThickness-DitchBottomWidth-OutsideWallThickness)DitchDepth/((InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)+(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)) / DitchDepth`
`P13`	—	offset + elevation delta from the reference point	P11	`Side*(InsideWallThickness+DitchBottomWidth+OutsideWallThickness)/2 / 0`
`P14`	—	offset + elevation delta from the reference point	P7	`Side*DitchBottomWidth/2 / 0`
`P15`	Lid_Top	offset + elevation delta from the reference point	P2	`Side*LidGapToOpening / 0`
`P16`	Lid_Top	offset + elevation delta from the reference point	P3	`-Side*LidGapToOpening / 0`
`P17`	—	offset + elevation delta from the reference point	P15	`0 / -InsideLidDepth`
`P18`	—	offset + elevation delta from the reference point	P16	`0 / -OutsideLidDepth`
`P21`	Ditch_Back_Fill	offset + elevation delta from the reference point	P16	`if(OutsideHingePointDepth<=0,Side(OutsideWallThicknessAtLid+LidGapToOpening),-Side(InsideWallThicknessAtLid+DitchOpeningAtLid+OutsideWallThicknessAtLid-InsideWallThickness-DitchBottomWidth-OutsideWallThickness)*OutsideHingePointDepth/((InsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth)+(OutsideLidDepth+LidGapToOpening+DitchDepth+DitchBedDepth))) / -OutsideHingePointDepth`
`P22`	—	offset + elevation delta from the reference point	P21	`SideOutsideBenchWidth / OutsideBenchWidthabs(OutsideBenchSlope)`
`P23`	Ditch_Out	offset + elevation delta from the reference point	P22	`SideOutsideDaylightWidth / OutsideDaylightWidthabs(OutsideDaylightSlope)`

Links

Link	Code	Between	Role
`L18`	Top,Datum	P19 → P20	drawn
`L19`	Top,Datum	P20 → P1	drawn
`L1`	Top	P1 → P2	drawn
`L7`	—	P2 → P5	drawn
`L8`	—	P5 → P6	drawn
`L9`	—	P6 → P7	drawn
`L10`	—	P7 → P8	drawn
`L11`	—	P8 → P9	drawn
`L12`	—	P9 → P10	drawn
`L13`	—	P10 → P3	drawn
`L3`	Top	P3 → P4	drawn
`L6`	Datum	P4 → P12	drawn
`L5`	Datum	P12 → P11	drawn
`L4`	Datum	P11 → P1	drawn
`L2`	Top	P15 → P16	drawn
`L16`	—	P16 → P18	drawn
`L15`	—	P18 → P17	drawn
`L14`	—	P17 → P15	drawn
`L20`	Top,Datum	P21 → P22	drawn
`L21`	Top,Datum	P22 → P23	drawn

Shapes (materials)

Shape	Material code	Boundary points
`DS`	Ditch	P1, P2, P5, P6, P7, P8, P9, P10, P3, P4, P12, P11
`LS`	Lid	P15, P16, P18, P17

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.