Shoulder Multi Surface

C3D ShoulderMultiSurface — 10 surfaces over paved + earthened bands

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`ShoulderMultiSurface`
Geometry	33 points, 52 links, 20 shapes

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`Pave1Depth`	number (metres unless the description says otherwise)	0.025	Surface 1 depth (m)
`Pave2Depth`	number (metres unless the description says otherwise)	0.025	Surface 2 depth (m)
`Pave3Depth`	number (metres unless the description says otherwise)	0.025	Surface 3 depth (m)
`Pave4Depth`	number (metres unless the description says otherwise)	0.025	Surface 4 depth (m)
`Pave5Depth`	number (metres unless the description says otherwise)	0.025	Surface 5 depth (m)
`Pave6Depth`	number (metres unless the description says otherwise)	0.025	Surface 6 depth (m)
`Pave7Depth`	number (metres unless the description says otherwise)	0.025	Surface 7 depth (m)
`Pave8Depth`	number (metres unless the description says otherwise)	0.025	Surface 8 depth (m)
`Pave9Depth`	number (metres unless the description says otherwise)	0.025	Surface 9 depth (m)
`Pave10Depth`	number (metres unless the description says otherwise)	0.025	Surface 10 depth (m)
`PavedShoulderWidth`	number (metres unless the description says otherwise)	0.9	Paved band width (m)
`DefaultPavedShoulderSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.06	Paved band cross slope
`EarthenedShoulderWidth`	number (metres unless the description says otherwise)	0.9	Earthened band width (m)
`DefaultEarthenedShoulderSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.04	Earthened band cross slope
`SubbaseDaylightType`	number (metres unless the description says otherwise)	0	0 = hold slope, 1 = hold width (derive slope)
`DaylightSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.5	Daylight slope when held
`DaylightWidth`	number (metres unless the description says otherwise)	0.9	Daylight width when held (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`P1`	ETW	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P2`	EPS	offset + elevation delta from the reference point	P1	`SidePavedShoulderWidth / PavedShoulderWidthDefaultPavedShoulderSlope`
`P3`	—	offset + elevation delta from the reference point	P2	`SideEarthenedShoulderWidth / EarthenedShoulderWidthDefaultEarthenedShoulderSlope`
`P4`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth)`
`P5`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth)`
`P6`	—	offset + elevation delta from the reference point	P3	`SidePave1Depth/(DefaultEarthenedShoulderSlope-DS) / Pave1DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P7`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth)`
`P8`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth)`
`P9`	—	offset + elevation delta from the reference point	P6	`SidePave2Depth/(DefaultEarthenedShoulderSlope-DS) / Pave2DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P10`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth)`
`P11`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth)`
`P12`	—	offset + elevation delta from the reference point	P9	`SidePave3Depth/(DefaultEarthenedShoulderSlope-DS) / Pave3DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P13`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth)`
`P14`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth)`
`P15`	—	offset + elevation delta from the reference point	P12	`SidePave4Depth/(DefaultEarthenedShoulderSlope-DS) / Pave4DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P16`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth)`
`P17`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth)`
`P18`	—	offset + elevation delta from the reference point	P15	`SidePave5Depth/(DefaultEarthenedShoulderSlope-DS) / Pave5DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P19`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth)`
`P20`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth)`
`P21`	—	offset + elevation delta from the reference point	P18	`SidePave6Depth/(DefaultEarthenedShoulderSlope-DS) / Pave6DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P22`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth)`
`P23`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth)`
`P24`	—	offset + elevation delta from the reference point	P21	`SidePave7Depth/(DefaultEarthenedShoulderSlope-DS) / Pave7DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P25`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth)`
`P26`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth)`
`P27`	—	offset + elevation delta from the reference point	P24	`SidePave8Depth/(DefaultEarthenedShoulderSlope-DS) / Pave8DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P28`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth+Pave9Depth)`
`P29`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth+Pave9Depth)`
`P30`	—	offset + elevation delta from the reference point	P27	`SidePave9Depth/(DefaultEarthenedShoulderSlope-DS) / Pave9DepthDS/(DefaultEarthenedShoulderSlope-DS)`
`P31`	—	offset + elevation delta from the reference point	P1	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth+Pave9Depth+Pave10Depth)`
`P32`	—	offset + elevation delta from the reference point	P2	`0 / 0-(Pave1Depth+Pave2Depth+Pave3Depth+Pave4Depth+Pave5Depth+Pave6Depth+Pave7Depth+Pave8Depth+Pave9Depth+Pave10Depth)`
`P33`	—	offset + elevation delta from the reference point	P30	`SidePave10Depth/(DefaultEarthenedShoulderSlope-DS) / Pave10DepthDS/(DefaultEarthenedShoulderSlope-DS)`

Links

Link	Code	Between	Role
`L1`	—	P1 → P2	drawn
`L2`	—	P2 → P3	drawn
`R1`	—	P4 → P5	drawn
`R2`	—	P5 → P6	drawn
`VI1`	—	P1 → P4	drawn
`VM1`	—	P2 → P5	drawn
`VF1`	—	P3 → P6	drawn
`R3`	—	P7 → P8	drawn
`R4`	—	P8 → P9	drawn
`VI2`	—	P4 → P7	drawn
`VM2`	—	P5 → P8	drawn
`VF2`	—	P6 → P9	drawn
`R5`	—	P10 → P11	drawn
`R6`	—	P11 → P12	drawn
`VI3`	—	P7 → P10	drawn
`VM3`	—	P8 → P11	drawn
`VF3`	—	P9 → P12	drawn
`R7`	—	P13 → P14	drawn
`R8`	—	P14 → P15	drawn
`VI4`	—	P10 → P13	drawn
`VM4`	—	P11 → P14	drawn
`VF4`	—	P12 → P15	drawn
`R9`	—	P16 → P17	drawn
`R10`	—	P17 → P18	drawn
`VI5`	—	P13 → P16	drawn
`VM5`	—	P14 → P17	drawn
`VF5`	—	P15 → P18	drawn
`R11`	—	P19 → P20	drawn
`R12`	—	P20 → P21	drawn
`VI6`	—	P16 → P19	drawn
`VM6`	—	P17 → P20	drawn
`VF6`	—	P18 → P21	drawn
`R13`	—	P22 → P23	drawn
`R14`	—	P23 → P24	drawn
`VI7`	—	P19 → P22	drawn
`VM7`	—	P20 → P23	drawn
`VF7`	—	P21 → P24	drawn
`R15`	—	P25 → P26	drawn
`R16`	—	P26 → P27	drawn
`VI8`	—	P22 → P25	drawn
`VM8`	—	P23 → P26	drawn
`VF8`	—	P24 → P27	drawn
`R17`	—	P28 → P29	drawn
`R18`	—	P29 → P30	drawn
`VI9`	—	P25 → P28	drawn
`VM9`	—	P26 → P29	drawn
`VF9`	—	P27 → P30	drawn
`R19`	—	P31 → P32	drawn
`R20`	—	P32 → P33	drawn
`VI10`	—	P28 → P31	drawn
`VM10`	—	P29 → P32	drawn
`VF10`	—	P30 → P33	drawn

Shapes (materials)

Shape	Material code	Boundary points
`SP1`	—	P1, P2, P5, P4
`SE1`	—	P2, P3, P6, P5
`SP2`	—	P4, P5, P8, P7
`SE2`	—	P5, P6, P9, P8
`SP3`	—	P7, P8, P11, P10
`SE3`	—	P8, P9, P12, P11
`SP4`	—	P10, P11, P14, P13
`SE4`	—	P11, P12, P15, P14
`SP5`	—	P13, P14, P17, P16
`SE5`	—	P14, P15, P18, P17
`SP6`	—	P16, P17, P20, P19
`SE6`	—	P17, P18, P21, P20
`SP7`	—	P19, P20, P23, P22
`SE7`	—	P20, P21, P24, P23
`SP8`	—	P22, P23, P26, P25
`SE8`	—	P23, P24, P27, P26
`SP9`	—	P25, P26, P29, P28
`SE9`	—	P26, P27, P30, P29
`SP10`	—	P28, P29, P32, P31
`SE10`	—	P29, P30, P33, P32

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.