Secondary Road Full Section

Lane + kerb & gutter + sidewalk + daylight both sides (the secondary outside the intersection)

At a glance


Kind	Assembly preset (whole cross-section)
Domain	Road
Geometry	160 points, 102 links, 14 shapes
Conditional geometry	80 of the points are created inside a branch — which ones appear depends on the parameters and the target surface
Targets	14 (surface / offset / elevation targets this subassembly can be linked to)

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`LaneR_Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`LaneR_Width`	number (metres unless the description says otherwise)	3.6	Lane width (m)
`LaneR_Pave1Depth`	number (metres unless the description says otherwise)	0.025	Pave1 depth (m)
`LaneR_Pave2Depth`	number (metres unless the description says otherwise)	0.025	Pave2 depth (m)
`LaneR_BaseDepth`	number (metres unless the description says otherwise)	0.15	Base depth (m)
`LaneR_SubBaseDepth`	number (metres unless the description says otherwise)	0.3	Sub-base depth (m)
`LaneR_DefaultSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Static cross slope when UseSuperelevation = None
`LaneR_UseSuperelevation`	number (metres unless the description says otherwise)	6	0 LeftLO / 1 LeftLI / 2 RightLO / 3 RightLI / 6 None
`LaneR_SlopeDirection`	number (metres unless the description says otherwise)	0	0 away from crown / 1 towards crown (flips sign)
`LaneR_InsidePointCode`	number (metres unless the description says otherwise)	0	0 Crown / 1 ETW / 2 Lane / 3 none
`LaneR_OutsidePointCode`	number (metres unless the description says otherwise)	1	0 Crown / 1 ETW / 2 Lane / 3 none
`LaneR_SupportAOR`	number (metres unless the description says otherwise)	1	1 = offer this lane as the AOR pivot
`CurbR_Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`CurbR_DimensionA`	number (metres unless the description says otherwise)	0.18	Depth at flange (m)
`CurbR_DimensionB`	number (metres unless the description says otherwise)	0.41	Flange to flowline (m)
`CurbR_DimensionC`	number (metres unless the description says otherwise)	0.025	Flowline drop (m)
`CurbR_DimensionD`	number (metres unless the description says otherwise)	0.15	Curb rise (m)
`CurbR_DimensionE`	number (metres unless the description says otherwise)	0.2	Flowline to back (m)
`CurbR_DimensionF`	number (metres unless the description says otherwise)	0.15	Curb top width (m)
`CurbR_DimensionG`	number (metres unless the description says otherwise)	0.33	Back-of-curb depth (m)
`CurbR_InsertionPoint`	whole number / mode selector	1	1 = attach at the gutter edge, 0 = attach at the back of curb
`CurbR_SubbaseDepth`	number (metres unless the description says otherwise)	0.45	Subbase depth at the flange; 0 = no subbase (m)
`CurbR_SubbaseExt`	number (metres unless the description says otherwise)	0.3	Subbase carried past the back of curb (m)
`CurbR_SubbaseSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Subbase slope (used when the method is 2)
`CurbR_SubbaseSlopeMethod`	whole number / mode selector	0	0 outside-lane superelevation, 1 inside-lane, 2 the SubbaseSlope parameter
`WalkR_Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`WalkR_InsideBoulevardWidth`	number (metres unless the description says otherwise)	0	Inside grass boulevard (m, target 1 fallback)
`WalkR_SidewalkWidth`	number (metres unless the description says otherwise)	1.5	Concrete sidewalk width (m, target 2 fallback)
`WalkR_OutsideBoulevardWidth`	number (metres unless the description says otherwise)	0	Outside grass boulevard (m, target 3 fallback)
`WalkR_Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0.02	Cross slope (TargetVA_Profile fallback)
`WalkR_Depth`	number (metres unless the description says otherwise)	0.1	Sidewalk slab depth (m)
`DayR_Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`DayR_Cut1Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 1 width (m, 0 = off)
`DayR_Cut1Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 1 grade
`DayR_Cut2Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 2 width (m, 0 = off)
`DayR_Cut2Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 2 grade
`DayR_Cut3Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 3 width (m, 0 = off)
`DayR_Cut3Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 3 grade
`DayR_Cut4Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 4 width (m, 0 = off)
`DayR_Cut4Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 4 grade
`DayR_Cut5Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 5 width (m, 0 = off)
`DayR_Cut5Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 5 grade
`DayR_Cut6Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 6 width (m, 0 = off)
`DayR_Cut6Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 6 grade
`DayR_Cut7Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 7 width (m, 0 = off)
`DayR_Cut7Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 7 grade
`DayR_Cut8Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 8 width (m, 0 = off)
`DayR_Cut8Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 8 grade
`DayR_Fill1Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 1 width (m, 0 = off)
`DayR_Fill1Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 1 grade
`DayR_Fill2Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 2 width (m, 0 = off)
`DayR_Fill2Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 2 grade
`DayR_Fill3Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 3 width (m, 0 = off)
`DayR_Fill3Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 3 grade
`DayR_FlatCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.166667	Cut grade for shallow cuts
`DayR_FlatCutMaxHeight`	number (metres unless the description says otherwise)	1.5	Max height for the flat cut grade (m)
`DayR_MediumCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.25	Cut grade for medium cuts
`DayR_MediumCutMaxHeight`	number (metres unless the description says otherwise)	3	Max height for the medium cut grade (m)
`DayR_SteepCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.5	Cut grade beyond the medium height
`DayR_FlatFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.166667	Fill grade for shallow fills
`DayR_FlatFillMaxHeight`	number (metres unless the description says otherwise)	1.5	Max depth for the flat fill grade (m)
`DayR_MediumFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.25	Fill grade for medium fills
`DayR_MediumFillMaxHeight`	number (metres unless the description says otherwise)	3	Max depth for the medium fill grade (m)
`DayR_SteepFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.5	Fill grade beyond the medium depth
`DayR_GuardrailWidth`	number (metres unless the description says otherwise)	0.6	Guardrail widening on steep fill (m, 0 = off)
`DayR_IncludeGuardrail`	whole number / mode selector	0	1 = draw the guardrail itself on the widening
`DayR_WidthToPost`	number (metres unless the description says otherwise)	1	Attach to the post (m)
`DayR_GuardrailProcSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Guardrail widening grade
`DayR_OmitDaylightLink`	on / off	off	1 = no daylight wing
`DayR_CutTestPoint`	whole number / mode selector	3	Cut links 1..N whose ends join the cut/fill test
`DayR_RoundingOption`	whole number / mode selector	0	0 = sharp catch, 1 = round it
`DayR_RoundingBy`	whole number / mode selector	0	0 = by arc length, 1 = by radius
`DayR_RoundingParameter`	number (metres unless the description says otherwise)	1.5	Arc length or radius (m)
`LaneL_Side`	+1 right of the baseline, −1 left	Left (−1)	+1 Right / -1 Left
`LaneL_Width`	number (metres unless the description says otherwise)	3.6	Lane width (m)
`LaneL_Pave1Depth`	number (metres unless the description says otherwise)	0.025	Pave1 depth (m)
`LaneL_Pave2Depth`	number (metres unless the description says otherwise)	0.025	Pave2 depth (m)
`LaneL_BaseDepth`	number (metres unless the description says otherwise)	0.15	Base depth (m)
`LaneL_SubBaseDepth`	number (metres unless the description says otherwise)	0.3	Sub-base depth (m)
`LaneL_DefaultSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Static cross slope when UseSuperelevation = None
`LaneL_UseSuperelevation`	number (metres unless the description says otherwise)	6	0 LeftLO / 1 LeftLI / 2 RightLO / 3 RightLI / 6 None
`LaneL_SlopeDirection`	number (metres unless the description says otherwise)	0	0 away from crown / 1 towards crown (flips sign)
`LaneL_InsidePointCode`	number (metres unless the description says otherwise)	0	0 Crown / 1 ETW / 2 Lane / 3 none
`LaneL_OutsidePointCode`	number (metres unless the description says otherwise)	1	0 Crown / 1 ETW / 2 Lane / 3 none
`LaneL_SupportAOR`	number (metres unless the description says otherwise)	1	1 = offer this lane as the AOR pivot
`CurbL_Side`	+1 right of the baseline, −1 left	Left (−1)	+1 Right / -1 Left
`CurbL_DimensionA`	number (metres unless the description says otherwise)	0.18	Depth at flange (m)
`CurbL_DimensionB`	number (metres unless the description says otherwise)	0.41	Flange to flowline (m)
`CurbL_DimensionC`	number (metres unless the description says otherwise)	0.025	Flowline drop (m)
`CurbL_DimensionD`	number (metres unless the description says otherwise)	0.15	Curb rise (m)
`CurbL_DimensionE`	number (metres unless the description says otherwise)	0.2	Flowline to back (m)
`CurbL_DimensionF`	number (metres unless the description says otherwise)	0.15	Curb top width (m)
`CurbL_DimensionG`	number (metres unless the description says otherwise)	0.33	Back-of-curb depth (m)
`CurbL_InsertionPoint`	whole number / mode selector	1	1 = attach at the gutter edge, 0 = attach at the back of curb
`CurbL_SubbaseDepth`	number (metres unless the description says otherwise)	0.45	Subbase depth at the flange; 0 = no subbase (m)
`CurbL_SubbaseExt`	number (metres unless the description says otherwise)	0.3	Subbase carried past the back of curb (m)
`CurbL_SubbaseSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Subbase slope (used when the method is 2)
`CurbL_SubbaseSlopeMethod`	whole number / mode selector	0	0 outside-lane superelevation, 1 inside-lane, 2 the SubbaseSlope parameter
`WalkL_Side`	+1 right of the baseline, −1 left	Left (−1)	+1 Right / -1 Left
`WalkL_InsideBoulevardWidth`	number (metres unless the description says otherwise)	0	Inside grass boulevard (m, target 1 fallback)
`WalkL_SidewalkWidth`	number (metres unless the description says otherwise)	1.5	Concrete sidewalk width (m, target 2 fallback)
`WalkL_OutsideBoulevardWidth`	number (metres unless the description says otherwise)	0	Outside grass boulevard (m, target 3 fallback)
`WalkL_Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0.02	Cross slope (TargetVA_Profile fallback)
`WalkL_Depth`	number (metres unless the description says otherwise)	0.1	Sidewalk slab depth (m)
`DayL_Side`	+1 right of the baseline, −1 left	Left (−1)	+1 Right / -1 Left
`DayL_Cut1Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 1 width (m, 0 = off)
`DayL_Cut1Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 1 grade
`DayL_Cut2Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 2 width (m, 0 = off)
`DayL_Cut2Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 2 grade
`DayL_Cut3Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 3 width (m, 0 = off)
`DayL_Cut3Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 3 grade
`DayL_Cut4Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 4 width (m, 0 = off)
`DayL_Cut4Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 4 grade
`DayL_Cut5Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 5 width (m, 0 = off)
`DayL_Cut5Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 5 grade
`DayL_Cut6Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 6 width (m, 0 = off)
`DayL_Cut6Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 6 grade
`DayL_Cut7Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 7 width (m, 0 = off)
`DayL_Cut7Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 7 grade
`DayL_Cut8Width`	number (metres unless the description says otherwise)	0	Fixed cut segment 8 width (m, 0 = off)
`DayL_Cut8Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed cut segment 8 grade
`DayL_Fill1Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 1 width (m, 0 = off)
`DayL_Fill1Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 1 grade
`DayL_Fill2Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 2 width (m, 0 = off)
`DayL_Fill2Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 2 grade
`DayL_Fill3Width`	number (metres unless the description says otherwise)	0	Fixed fill segment 3 width (m, 0 = off)
`DayL_Fill3Slope`	cross slope as a ratio (−0.02 = 2 % fall)	0	Fixed fill segment 3 grade
`DayL_FlatCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.166667	Cut grade for shallow cuts
`DayL_FlatCutMaxHeight`	number (metres unless the description says otherwise)	1.5	Max height for the flat cut grade (m)
`DayL_MediumCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.25	Cut grade for medium cuts
`DayL_MediumCutMaxHeight`	number (metres unless the description says otherwise)	3	Max height for the medium cut grade (m)
`DayL_SteepCutSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.5	Cut grade beyond the medium height
`DayL_FlatFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.166667	Fill grade for shallow fills
`DayL_FlatFillMaxHeight`	number (metres unless the description says otherwise)	1.5	Max depth for the flat fill grade (m)
`DayL_MediumFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.25	Fill grade for medium fills
`DayL_MediumFillMaxHeight`	number (metres unless the description says otherwise)	3	Max depth for the medium fill grade (m)
`DayL_SteepFillSlope`	cross slope as a ratio (−0.02 = 2 % fall)	0.5	Fill grade beyond the medium depth
`DayL_GuardrailWidth`	number (metres unless the description says otherwise)	0.6	Guardrail widening on steep fill (m, 0 = off)
`DayL_IncludeGuardrail`	whole number / mode selector	0	1 = draw the guardrail itself on the widening
`DayL_WidthToPost`	number (metres unless the description says otherwise)	1	Attach to the post (m)
`DayL_GuardrailProcSlope`	cross slope as a ratio (−0.02 = 2 % fall)	-0.02	Guardrail widening grade
`DayL_OmitDaylightLink`	on / off	off	1 = no daylight wing
`DayL_CutTestPoint`	whole number / mode selector	3	Cut links 1..N whose ends join the cut/fill test
`DayL_RoundingOption`	whole number / mode selector	0	0 = sharp catch, 1 = round it
`DayL_RoundingBy`	whole number / mode selector	0	0 = by arc length, 1 = by radius
`DayL_RoundingParameter`	number (metres unless the description says otherwise)	1.5	Arc length or radius (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`LaneR_P1`	Crown	offset + elevation delta from the reference point	—	`0 / 0`
`LaneR_P2`	ETW	horizontal delta from the reference, elevation from a slope	LaneR_P1	`LaneR_Side*LaneR_Width / LaneR_LnSlp`
`LaneR_P3`	Crown_Pave1	offset + elevation delta from the reference point	LaneR_P1	`0 / -(LaneR_Pave1Depth)`
`LaneR_P7`	ETW_Pave1	offset + elevation delta from the reference point	LaneR_P2	`0 / -(LaneR_Pave1Depth)`
`LaneR_P4`	Crown_Pave2	offset + elevation delta from the reference point	LaneR_P1	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth)`
`LaneR_P8`	ETW_Pave2	offset + elevation delta from the reference point	LaneR_P2	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth)`
`LaneR_P5`	Crown_Base	offset + elevation delta from the reference point	LaneR_P1	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth+LaneR_BaseDepth)`
`LaneR_P9`	ETW_Base	offset + elevation delta from the reference point	LaneR_P2	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth+LaneR_BaseDepth)`
`LaneR_P6`	Crown_SubBase	offset + elevation delta from the reference point	LaneR_P1	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth+LaneR_BaseDepth+LaneR_SubBaseDepth)`
`LaneR_P10`	ETW_SubBase	offset + elevation delta from the reference point	LaneR_P2	`0 / -(LaneR_Pave1Depth+LaneR_Pave2Depth+LaneR_BaseDepth+LaneR_SubBaseDepth)`
`CurbR_P1`	Flange	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,0,CurbR_Side*(CurbR_DimensionB+CurbR_DimensionE)) / if(CurbR_InsertionPoint>0.5,0,0-(CurbR_DimensionD-CurbR_DimensionC))`
`CurbR_P2`	Flowline_Gutter	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,CurbR_SideCurbR_DimensionB,CurbR_SideCurbR_DimensionE) / if(CurbR_InsertionPoint>0.5,0-CurbR_DimensionC,0-CurbR_DimensionD)`
`CurbR_P3`	Top_Curb	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,CurbR_Side(CurbR_DimensionB+CurbR_DimensionE-CurbR_DimensionF),CurbR_SideCurbR_DimensionF) / if(CurbR_InsertionPoint>0.5,CurbR_DimensionD-CurbR_DimensionC,0)`
`CurbR_P4`	Back_Curb	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,CurbR_Side*(CurbR_DimensionB+CurbR_DimensionE),0) / if(CurbR_InsertionPoint>0.5,CurbR_DimensionD-CurbR_DimensionC,0)`
`CurbR_P5`	—	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,CurbR_Side*(CurbR_DimensionB+CurbR_DimensionE),0) / if(CurbR_InsertionPoint>0.5,CurbR_DimensionD-CurbR_DimensionC-CurbR_DimensionG,0-CurbR_DimensionG)`
`CurbR_P6`	—	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,0,CurbR_Side*(CurbR_DimensionB+CurbR_DimensionE)) / if(CurbR_InsertionPoint>0.5,0-CurbR_DimensionA,0-(CurbR_DimensionD-CurbR_DimensionC)-CurbR_DimensionA)`
`CurbR_P7` conditional	—	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,0,CurbR_P1.Offset) / if(CurbR_InsertionPoint>0.5,0-CurbR_SubbaseDepth,CurbR_P1.Y-CurbR_SubbaseDepth)`
`CurbR_P8` conditional	—	offset + elevation delta from the reference point	LaneR_P2	`if(CurbR_InsertionPoint>0.5,CurbR_P5.Offset+CurbR_SideCurbR_SubbaseExt,0-CurbR_SideCurbR_SubbaseExt) / if(CurbR_InsertionPoint>0.5,CurbR_P7.Y+abs(CurbR_P5.Offset+CurbR_SideCurbR_SubbaseExt)CurbR_SBS,CurbR_P7.Y+abs((CurbR_DimensionB+CurbR_DimensionE)+CurbR_SubbaseExt)*CurbR_SBS)`
`CurbR_P9` conditional	—	offset + elevation delta from the reference point	LaneR_P2	`CurbR_P8.Offset / CurbR_P6.Y-(CurbR_DimensionG-CurbR_DimensionA-CurbR_DimensionD+CurbR_DimensionC)*((CurbR_DimensionB+CurbR_DimensionE)+CurbR_SubbaseExt)/(CurbR_DimensionB+CurbR_DimensionE)`
`WalkR_P1`	—	offset + elevation delta from the reference point	CurbR_P4	`0 / 0`
`WalkR_P2`	Sidewalk_In	offset + elevation delta from the reference point	WalkR_P1	`WalkR_SideWalkR_IW / WalkR_IWWalkR_ES`
`WalkR_P3`	Sidewalk_Out	offset + elevation delta from the reference point	WalkR_P2	`WalkR_SideWalkR_SW / WalkR_SWWalkR_ES`
`WalkR_P4`	—	offset + elevation delta from the reference point	WalkR_P3	`WalkR_SideWalkR_OW / WalkR_OWWalkR_ES`
`WalkR_P5`	—	offset + elevation delta from the reference point	WalkR_P2	`0 / -WalkR_Depth`
`WalkR_P6`	—	offset + elevation delta from the reference point	WalkR_P3	`0 / -WalkR_Depth`
`DayR_P0`	Hinge	offset + elevation delta from the reference point	WalkR_P4	`0 / 0`
`DayR_GQ0`	—	horizontal delta, elevation taken from the target surface	DayR_P0	`0 / 0`
`DayR_TQ1`	—	offset + elevation delta from the reference point	DayR_P0	`DayR_SideDayR_Cut1Width / DayR_Cut1WidthDayR_Cut1Slope`
`DayR_GQ1`	—	horizontal delta, elevation taken from the target surface	DayR_TQ1	`0 / 0`
`DayR_TQ2`	—	offset + elevation delta from the reference point	DayR_TQ1	`DayR_SideDayR_Cut2Width / DayR_Cut2WidthDayR_Cut2Slope`
`DayR_GQ2`	—	horizontal delta, elevation taken from the target surface	DayR_TQ2	`0 / 0`
`DayR_TQ3`	—	offset + elevation delta from the reference point	DayR_TQ2	`DayR_SideDayR_Cut3Width / DayR_Cut3WidthDayR_Cut3Slope`
`DayR_GQ3`	—	horizontal delta, elevation taken from the target surface	DayR_TQ3	`0 / 0`
`DayR_TQ4`	—	offset + elevation delta from the reference point	DayR_TQ3	`DayR_SideDayR_Cut4Width / DayR_Cut4WidthDayR_Cut4Slope`
`DayR_GQ4`	—	horizontal delta, elevation taken from the target surface	DayR_TQ4	`0 / 0`
`DayR_TQ5`	—	offset + elevation delta from the reference point	DayR_TQ4	`DayR_SideDayR_Cut5Width / DayR_Cut5WidthDayR_Cut5Slope`
`DayR_GQ5`	—	horizontal delta, elevation taken from the target surface	DayR_TQ5	`0 / 0`
`DayR_TQ6`	—	offset + elevation delta from the reference point	DayR_TQ5	`DayR_SideDayR_Cut6Width / DayR_Cut6WidthDayR_Cut6Slope`
`DayR_GQ6`	—	horizontal delta, elevation taken from the target surface	DayR_TQ6	`0 / 0`
`DayR_TQ7`	—	offset + elevation delta from the reference point	DayR_TQ6	`DayR_SideDayR_Cut7Width / DayR_Cut7WidthDayR_Cut7Slope`
`DayR_GQ7`	—	horizontal delta, elevation taken from the target surface	DayR_TQ7	`0 / 0`
`DayR_TQ8`	—	offset + elevation delta from the reference point	DayR_TQ7	`DayR_SideDayR_Cut8Width / DayR_Cut8WidthDayR_Cut8Slope`
`DayR_GQ8`	—	horizontal delta, elevation taken from the target surface	DayR_TQ8	`0 / 0`
`DayR_CS1` conditional	—	offset + elevation delta from the reference point	DayR_P0	`DayR_SideDayR_Cut1Width / DayR_Cut1WidthDayR_Cut1Slope`
`DayR_GS1` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS1	`0 / 0`
`DayR_CS2` conditional	—	offset + elevation delta from the reference point	DayR_CS1	`DayR_SideDayR_Cut2Width / DayR_Cut2WidthDayR_Cut2Slope`
`DayR_GS2` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS2	`0 / 0`
`DayR_CS3` conditional	—	offset + elevation delta from the reference point	DayR_CS2	`DayR_SideDayR_Cut3Width / DayR_Cut3WidthDayR_Cut3Slope`
`DayR_GS3` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS3	`0 / 0`
`DayR_CS4` conditional	—	offset + elevation delta from the reference point	DayR_CS3	`DayR_SideDayR_Cut4Width / DayR_Cut4WidthDayR_Cut4Slope`
`DayR_GS4` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS4	`0 / 0`
`DayR_CS5` conditional	—	offset + elevation delta from the reference point	DayR_CS4	`DayR_SideDayR_Cut5Width / DayR_Cut5WidthDayR_Cut5Slope`
`DayR_GS5` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS5	`0 / 0`
`DayR_CS6` conditional	—	offset + elevation delta from the reference point	DayR_CS5	`DayR_SideDayR_Cut6Width / DayR_Cut6WidthDayR_Cut6Slope`
`DayR_GS6` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS6	`0 / 0`
`DayR_CS7` conditional	—	offset + elevation delta from the reference point	DayR_CS6	`DayR_SideDayR_Cut7Width / DayR_Cut7WidthDayR_Cut7Slope`
`DayR_GS7` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS7	`0 / 0`
`DayR_CS8` conditional	—	offset + elevation delta from the reference point	DayR_CS7	`DayR_SideDayR_Cut8Width / DayR_Cut8WidthDayR_Cut8Slope`
`DayR_GS8` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS8	`0 / 0`
`DayR_RDC` conditional	—	horizontal delta, elevation taken from the target surface	DayR_CS8	`0 / 0`
`DayR_DL` conditional	Daylight,Daylight_Cut	walk out at a slope until the target surface is met (daylight)	DayR_CS8	`if(DayR_HC <= DayR_FlatCutMaxHeight, DayR_FlatCutSlope, if(DayR_HC <= DayR_MediumCutMaxHeight, DayR_MediumCutSlope, DayR_SteepCutSlope)) / DayR_Side*60`
`DayR_RGCG` conditional	—	horizontal delta, elevation taken from the target surface	DayR_DL	`DayR_Side*abs(DayR_DL.Offset-DayR_P0.Offset) / 0`
`DayR_RGC_p1` conditional	Daylight	offset + elevation delta from the reference point	WalkR_P4	`DayR_DL.Offset-(DayR_DL.Offset-DayR_CS8.Offset)/DayR_RGCL1DayR_RGCPA / DayR_DL.Y-(DayR_DL.Y-DayR_CS8.Y)/DayR_RGCL1DayR_RGCPA`
`DayR_RGC_p2` conditional	Daylight	offset + elevation delta from the reference point	WalkR_P4	`DayR_DL.Offset+(DayR_RGCG.Offset-DayR_DL.Offset)/DayR_RGCL2DayR_RGCPB / DayR_DL.Y+(DayR_RGCG.Y-DayR_DL.Y)/DayR_RGCL2DayR_RGCPB`
`DayR_FS1` conditional	—	offset + elevation delta from the reference point	DayR_P0	`DayR_SideDayR_Fill1Width / -(DayR_Fill1WidthDayR_Fill1Slope)`
`DayR_FS2` conditional	—	offset + elevation delta from the reference point	DayR_FS1	`DayR_SideDayR_Fill2Width / -(DayR_Fill2WidthDayR_Fill2Slope)`
`DayR_FS3` conditional	—	offset + elevation delta from the reference point	DayR_FS2	`DayR_SideDayR_Fill3Width / -(DayR_Fill3WidthDayR_Fill3Slope)`
`DayR_RDF` conditional	—	horizontal delta, elevation taken from the target surface	DayR_FS3	`0 / 0`
`DayR_GW` conditional	—	offset + elevation delta from the reference point	DayR_FS3	`DayR_Side(if(DayR_DF > DayR_MediumFillMaxHeight, DayR_GuardrailWidth, 0)) / if(DayR_DF > DayR_MediumFillMaxHeight, DayR_GuardrailWidth, 0)DayR_GuardrailProcSlope`
`DayR_GR1` conditional	Guardrail	offset + elevation delta from the reference point	DayR_FS3	`DayR_SideDayR_WidthToPost / DayR_WidthToPostDayR_GuardrailProcSlope`
`DayR_GR2` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR1	`0 / 0.75-0.3`
`DayR_GR3` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR2	`0-DayR_Side*0.2 / 0`
`DayR_GR4` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR3	`0-DayR_Side*0.125 / 0.3/4`
`DayR_GR5` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR4	`DayR_Side*0.125 / 0.3/4`
`DayR_GR6` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR5	`0-DayR_Side*0.125 / 0.3/4`
`DayR_GR7` conditional	Guardrail	offset + elevation delta from the reference point	WalkR_P4	`DayR_GR3.Offset / DayR_GR1.Y+0.75`
`DayR_GR8` conditional	Guardrail	offset + elevation delta from the reference point	WalkR_P4	`DayR_GR1.Offset / DayR_GR7.Y`
`DayR_GR9` conditional	Guardrail	offset + elevation delta from the reference point	DayR_GR8	`DayR_Side*0.2 / 0`
`DayR_GR10` conditional	Guardrail	offset + elevation delta from the reference point	WalkR_P4	`DayR_GR9.Offset / DayR_GR1.Y+0.2*DayR_GuardrailProcSlope`
`DayR_DL` conditional	Daylight,Daylight_Fill	walk out at a slope until the target surface is met (daylight)	DayR_GW	`-(if(DayR_DF <= DayR_FlatFillMaxHeight, DayR_FlatFillSlope, if(DayR_DF <= DayR_MediumFillMaxHeight, DayR_MediumFillSlope, DayR_SteepFillSlope))) / DayR_Side*60`
`LaneL_P1`	Crown	offset + elevation delta from the reference point	—	`0 / 0`
`LaneL_P2`	ETW	horizontal delta from the reference, elevation from a slope	LaneL_P1	`LaneL_Side*LaneL_Width / LaneL_LnSlp`
`LaneL_P3`	Crown_Pave1	offset + elevation delta from the reference point	LaneL_P1	`0 / -(LaneL_Pave1Depth)`
`LaneL_P7`	ETW_Pave1	offset + elevation delta from the reference point	LaneL_P2	`0 / -(LaneL_Pave1Depth)`
`LaneL_P4`	Crown_Pave2	offset + elevation delta from the reference point	LaneL_P1	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth)`
`LaneL_P8`	ETW_Pave2	offset + elevation delta from the reference point	LaneL_P2	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth)`
`LaneL_P5`	Crown_Base	offset + elevation delta from the reference point	LaneL_P1	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth+LaneL_BaseDepth)`
`LaneL_P9`	ETW_Base	offset + elevation delta from the reference point	LaneL_P2	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth+LaneL_BaseDepth)`
`LaneL_P6`	Crown_SubBase	offset + elevation delta from the reference point	LaneL_P1	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth+LaneL_BaseDepth+LaneL_SubBaseDepth)`
`LaneL_P10`	ETW_SubBase	offset + elevation delta from the reference point	LaneL_P2	`0 / -(LaneL_Pave1Depth+LaneL_Pave2Depth+LaneL_BaseDepth+LaneL_SubBaseDepth)`
`CurbL_P1`	Flange	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,0,CurbL_Side*(CurbL_DimensionB+CurbL_DimensionE)) / if(CurbL_InsertionPoint>0.5,0,0-(CurbL_DimensionD-CurbL_DimensionC))`
`CurbL_P2`	Flowline_Gutter	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,CurbL_SideCurbL_DimensionB,CurbL_SideCurbL_DimensionE) / if(CurbL_InsertionPoint>0.5,0-CurbL_DimensionC,0-CurbL_DimensionD)`
`CurbL_P3`	Top_Curb	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,CurbL_Side(CurbL_DimensionB+CurbL_DimensionE-CurbL_DimensionF),CurbL_SideCurbL_DimensionF) / if(CurbL_InsertionPoint>0.5,CurbL_DimensionD-CurbL_DimensionC,0)`
`CurbL_P4`	Back_Curb	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,CurbL_Side*(CurbL_DimensionB+CurbL_DimensionE),0) / if(CurbL_InsertionPoint>0.5,CurbL_DimensionD-CurbL_DimensionC,0)`
`CurbL_P5`	—	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,CurbL_Side*(CurbL_DimensionB+CurbL_DimensionE),0) / if(CurbL_InsertionPoint>0.5,CurbL_DimensionD-CurbL_DimensionC-CurbL_DimensionG,0-CurbL_DimensionG)`
`CurbL_P6`	—	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,0,CurbL_Side*(CurbL_DimensionB+CurbL_DimensionE)) / if(CurbL_InsertionPoint>0.5,0-CurbL_DimensionA,0-(CurbL_DimensionD-CurbL_DimensionC)-CurbL_DimensionA)`
`CurbL_P7` conditional	—	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,0,CurbL_P1.Offset) / if(CurbL_InsertionPoint>0.5,0-CurbL_SubbaseDepth,CurbL_P1.Y-CurbL_SubbaseDepth)`
`CurbL_P8` conditional	—	offset + elevation delta from the reference point	LaneL_P2	`if(CurbL_InsertionPoint>0.5,CurbL_P5.Offset+CurbL_SideCurbL_SubbaseExt,0-CurbL_SideCurbL_SubbaseExt) / if(CurbL_InsertionPoint>0.5,CurbL_P7.Y+abs(CurbL_P5.Offset+CurbL_SideCurbL_SubbaseExt)CurbL_SBS,CurbL_P7.Y+abs((CurbL_DimensionB+CurbL_DimensionE)+CurbL_SubbaseExt)*CurbL_SBS)`
`CurbL_P9` conditional	—	offset + elevation delta from the reference point	LaneL_P2	`CurbL_P8.Offset / CurbL_P6.Y-(CurbL_DimensionG-CurbL_DimensionA-CurbL_DimensionD+CurbL_DimensionC)*((CurbL_DimensionB+CurbL_DimensionE)+CurbL_SubbaseExt)/(CurbL_DimensionB+CurbL_DimensionE)`
`WalkL_P1`	—	offset + elevation delta from the reference point	CurbL_P4	`0 / 0`
`WalkL_P2`	Sidewalk_In	offset + elevation delta from the reference point	WalkL_P1	`WalkL_SideWalkL_IW / WalkL_IWWalkL_ES`
`WalkL_P3`	Sidewalk_Out	offset + elevation delta from the reference point	WalkL_P2	`WalkL_SideWalkL_SW / WalkL_SWWalkL_ES`
`WalkL_P4`	—	offset + elevation delta from the reference point	WalkL_P3	`WalkL_SideWalkL_OW / WalkL_OWWalkL_ES`
`WalkL_P5`	—	offset + elevation delta from the reference point	WalkL_P2	`0 / -WalkL_Depth`
`WalkL_P6`	—	offset + elevation delta from the reference point	WalkL_P3	`0 / -WalkL_Depth`
`DayL_P0`	Hinge	offset + elevation delta from the reference point	WalkL_P4	`0 / 0`
`DayL_GQ0`	—	horizontal delta, elevation taken from the target surface	DayL_P0	`0 / 0`
`DayL_TQ1`	—	offset + elevation delta from the reference point	DayL_P0	`DayL_SideDayL_Cut1Width / DayL_Cut1WidthDayL_Cut1Slope`
`DayL_GQ1`	—	horizontal delta, elevation taken from the target surface	DayL_TQ1	`0 / 0`
`DayL_TQ2`	—	offset + elevation delta from the reference point	DayL_TQ1	`DayL_SideDayL_Cut2Width / DayL_Cut2WidthDayL_Cut2Slope`
`DayL_GQ2`	—	horizontal delta, elevation taken from the target surface	DayL_TQ2	`0 / 0`
`DayL_TQ3`	—	offset + elevation delta from the reference point	DayL_TQ2	`DayL_SideDayL_Cut3Width / DayL_Cut3WidthDayL_Cut3Slope`
`DayL_GQ3`	—	horizontal delta, elevation taken from the target surface	DayL_TQ3	`0 / 0`
`DayL_TQ4`	—	offset + elevation delta from the reference point	DayL_TQ3	`DayL_SideDayL_Cut4Width / DayL_Cut4WidthDayL_Cut4Slope`
`DayL_GQ4`	—	horizontal delta, elevation taken from the target surface	DayL_TQ4	`0 / 0`
`DayL_TQ5`	—	offset + elevation delta from the reference point	DayL_TQ4	`DayL_SideDayL_Cut5Width / DayL_Cut5WidthDayL_Cut5Slope`
`DayL_GQ5`	—	horizontal delta, elevation taken from the target surface	DayL_TQ5	`0 / 0`
`DayL_TQ6`	—	offset + elevation delta from the reference point	DayL_TQ5	`DayL_SideDayL_Cut6Width / DayL_Cut6WidthDayL_Cut6Slope`
`DayL_GQ6`	—	horizontal delta, elevation taken from the target surface	DayL_TQ6	`0 / 0`
`DayL_TQ7`	—	offset + elevation delta from the reference point	DayL_TQ6	`DayL_SideDayL_Cut7Width / DayL_Cut7WidthDayL_Cut7Slope`
`DayL_GQ7`	—	horizontal delta, elevation taken from the target surface	DayL_TQ7	`0 / 0`
`DayL_TQ8`	—	offset + elevation delta from the reference point	DayL_TQ7	`DayL_SideDayL_Cut8Width / DayL_Cut8WidthDayL_Cut8Slope`
`DayL_GQ8`	—	horizontal delta, elevation taken from the target surface	DayL_TQ8	`0 / 0`
`DayL_CS1` conditional	—	offset + elevation delta from the reference point	DayL_P0	`DayL_SideDayL_Cut1Width / DayL_Cut1WidthDayL_Cut1Slope`
`DayL_GS1` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS1	`0 / 0`
`DayL_CS2` conditional	—	offset + elevation delta from the reference point	DayL_CS1	`DayL_SideDayL_Cut2Width / DayL_Cut2WidthDayL_Cut2Slope`
`DayL_GS2` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS2	`0 / 0`
`DayL_CS3` conditional	—	offset + elevation delta from the reference point	DayL_CS2	`DayL_SideDayL_Cut3Width / DayL_Cut3WidthDayL_Cut3Slope`
`DayL_GS3` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS3	`0 / 0`
`DayL_CS4` conditional	—	offset + elevation delta from the reference point	DayL_CS3	`DayL_SideDayL_Cut4Width / DayL_Cut4WidthDayL_Cut4Slope`
`DayL_GS4` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS4	`0 / 0`
`DayL_CS5` conditional	—	offset + elevation delta from the reference point	DayL_CS4	`DayL_SideDayL_Cut5Width / DayL_Cut5WidthDayL_Cut5Slope`
`DayL_GS5` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS5	`0 / 0`
`DayL_CS6` conditional	—	offset + elevation delta from the reference point	DayL_CS5	`DayL_SideDayL_Cut6Width / DayL_Cut6WidthDayL_Cut6Slope`
`DayL_GS6` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS6	`0 / 0`
`DayL_CS7` conditional	—	offset + elevation delta from the reference point	DayL_CS6	`DayL_SideDayL_Cut7Width / DayL_Cut7WidthDayL_Cut7Slope`
`DayL_GS7` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS7	`0 / 0`
`DayL_CS8` conditional	—	offset + elevation delta from the reference point	DayL_CS7	`DayL_SideDayL_Cut8Width / DayL_Cut8WidthDayL_Cut8Slope`
`DayL_GS8` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS8	`0 / 0`
`DayL_RDC` conditional	—	horizontal delta, elevation taken from the target surface	DayL_CS8	`0 / 0`
`DayL_DL` conditional	Daylight,Daylight_Cut	walk out at a slope until the target surface is met (daylight)	DayL_CS8	`if(DayL_HC <= DayL_FlatCutMaxHeight, DayL_FlatCutSlope, if(DayL_HC <= DayL_MediumCutMaxHeight, DayL_MediumCutSlope, DayL_SteepCutSlope)) / DayL_Side*60`
`DayL_RGCG` conditional	—	horizontal delta, elevation taken from the target surface	DayL_DL	`DayL_Side*abs(DayL_DL.Offset-DayL_P0.Offset) / 0`
`DayL_RGC_p1` conditional	Daylight	offset + elevation delta from the reference point	WalkL_P4	`DayL_DL.Offset-(DayL_DL.Offset-DayL_CS8.Offset)/DayL_RGCL1DayL_RGCPA / DayL_DL.Y-(DayL_DL.Y-DayL_CS8.Y)/DayL_RGCL1DayL_RGCPA`
`DayL_RGC_p2` conditional	Daylight	offset + elevation delta from the reference point	WalkL_P4	`DayL_DL.Offset+(DayL_RGCG.Offset-DayL_DL.Offset)/DayL_RGCL2DayL_RGCPB / DayL_DL.Y+(DayL_RGCG.Y-DayL_DL.Y)/DayL_RGCL2DayL_RGCPB`
`DayL_FS1` conditional	—	offset + elevation delta from the reference point	DayL_P0	`DayL_SideDayL_Fill1Width / -(DayL_Fill1WidthDayL_Fill1Slope)`
`DayL_FS2` conditional	—	offset + elevation delta from the reference point	DayL_FS1	`DayL_SideDayL_Fill2Width / -(DayL_Fill2WidthDayL_Fill2Slope)`
`DayL_FS3` conditional	—	offset + elevation delta from the reference point	DayL_FS2	`DayL_SideDayL_Fill3Width / -(DayL_Fill3WidthDayL_Fill3Slope)`
`DayL_RDF` conditional	—	horizontal delta, elevation taken from the target surface	DayL_FS3	`0 / 0`
`DayL_GW` conditional	—	offset + elevation delta from the reference point	DayL_FS3	`DayL_Side(if(DayL_DF > DayL_MediumFillMaxHeight, DayL_GuardrailWidth, 0)) / if(DayL_DF > DayL_MediumFillMaxHeight, DayL_GuardrailWidth, 0)DayL_GuardrailProcSlope`
`DayL_GR1` conditional	Guardrail	offset + elevation delta from the reference point	DayL_FS3	`DayL_SideDayL_WidthToPost / DayL_WidthToPostDayL_GuardrailProcSlope`
`DayL_GR2` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR1	`0 / 0.75-0.3`
`DayL_GR3` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR2	`0-DayL_Side*0.2 / 0`
`DayL_GR4` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR3	`0-DayL_Side*0.125 / 0.3/4`
`DayL_GR5` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR4	`DayL_Side*0.125 / 0.3/4`
`DayL_GR6` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR5	`0-DayL_Side*0.125 / 0.3/4`
`DayL_GR7` conditional	Guardrail	offset + elevation delta from the reference point	WalkL_P4	`DayL_GR3.Offset / DayL_GR1.Y+0.75`
`DayL_GR8` conditional	Guardrail	offset + elevation delta from the reference point	WalkL_P4	`DayL_GR1.Offset / DayL_GR7.Y`
`DayL_GR9` conditional	Guardrail	offset + elevation delta from the reference point	DayL_GR8	`DayL_Side*0.2 / 0`
`DayL_GR10` conditional	Guardrail	offset + elevation delta from the reference point	WalkL_P4	`DayL_GR9.Offset / DayL_GR1.Y+0.2*DayL_GuardrailProcSlope`
`DayL_DL` conditional	Daylight,Daylight_Fill	walk out at a slope until the target surface is met (daylight)	DayL_GW	`-(if(DayL_DF <= DayL_FlatFillMaxHeight, DayL_FlatFillSlope, if(DayL_DF <= DayL_MediumFillMaxHeight, DayL_MediumFillSlope, DayL_SteepFillSlope))) / DayL_Side*60`

Links

Link	Code	Between	Role
`LaneR_L1`	Top,Pave	LaneR_P1 → LaneR_P2	drawn
`LaneR_L2`	Pave1	LaneR_P3 → LaneR_P7	drawn
`LaneR_L3`	Pave2	LaneR_P4 → LaneR_P8	drawn
`LaneR_L4`	Base	LaneR_P5 → LaneR_P9	drawn
`LaneR_L5`	Datum,SubBase	LaneR_P6 → LaneR_P10	drawn
`CurbR_L1`	Curb,Top	CurbR_P1 → CurbR_P2	drawn
`CurbR_L2`	Curb,Top	CurbR_P2 → CurbR_P3	drawn
`CurbR_L3`	Curb,Top	CurbR_P3 → CurbR_P4	drawn
`CurbR_L4`	—	CurbR_P4 → CurbR_P5	drawn
`CurbR_L5`	Datum	CurbR_P5 → CurbR_P6	drawn
`CurbR_L6`	—	CurbR_P6 → CurbR_P1	drawn
`CurbR_L7`	—	CurbR_P6 → CurbR_P5	drawn
`CurbR_L8`	—	CurbR_P5 → CurbR_P9	drawn
`CurbR_L9`	—	CurbR_P9 → CurbR_P8	drawn
`CurbR_L10`	Datum,SubBase	CurbR_P8 → CurbR_P7	drawn
`CurbR_L11`	—	CurbR_P7 → CurbR_P6	drawn
`WalkR_L1`	Top,Datum,Sod	WalkR_P1 → WalkR_P2	drawn
`WalkR_L2`	Top,Datum,Sod	WalkR_P3 → WalkR_P4	drawn
`WalkR_S0`	Top,Sidewalk	WalkR_P2 → WalkR_P3	drawn
`WalkR_S1`	Sidewalk,Datum	WalkR_P3 → WalkR_P6	drawn
`WalkR_S2`	Sidewalk,Datum	WalkR_P6 → WalkR_P5	drawn
`WalkR_S3`	Sidewalk,Datum	WalkR_P5 → WalkR_P2	drawn
`DayR_LCS1`	Cut	DayR_P0 → DayR_CS1	drawn
`DayR_LCS2`	Cut	DayR_CS1 → DayR_CS2	drawn
`DayR_LCS3`	Cut	DayR_CS2 → DayR_CS3	drawn
`DayR_LCS4`	Cut	DayR_CS3 → DayR_CS4	drawn
`DayR_LCS5`	Cut	DayR_CS4 → DayR_CS5	drawn
`DayR_LCS6`	Cut	DayR_CS5 → DayR_CS6	drawn
`DayR_LCS7`	Cut	DayR_CS6 → DayR_CS7	drawn
`DayR_LCS8`	Cut	DayR_CS7 → DayR_CS8	drawn
`DayR_RGCSA`	Daylight	DayR_CS8 → DayR_DL	drawn
`DayR_RGCRA`	Daylight	DayR_CS8 → DayR_RGC_t1	drawn
`DayR_RGCPA1`	Daylight	DayR_CS8 → DayR_RGC_p1	drawn
`DayR_LFS1`	Fill	DayR_P0 → DayR_FS1	drawn
`DayR_LFS2`	Fill	DayR_FS1 → DayR_FS2	drawn
`DayR_LFS3`	Fill	DayR_FS2 → DayR_FS3	drawn
`DayR_LGW`	Guardrail	DayR_FS3 → DayR_GW	drawn
`DayR_LGR1`	Guardrail	DayR_GR1 → DayR_GR2	drawn
`DayR_LGR2`	Guardrail	DayR_GR2 → DayR_GR3	drawn
`DayR_LGR3`	Guardrail	DayR_GR3 → DayR_GR4	drawn
`DayR_LGR4`	Guardrail	DayR_GR4 → DayR_GR5	drawn
`DayR_LGR5`	Guardrail	DayR_GR5 → DayR_GR6	drawn
`DayR_LGR6`	Guardrail	DayR_GR6 → DayR_GR7	drawn
`DayR_LGR7`	Guardrail	DayR_GR7 → DayR_GR8	drawn
`DayR_LGR8`	Guardrail	DayR_GR8 → DayR_GR9	drawn
`DayR_LGR9`	Guardrail	DayR_GR9 → DayR_GR10	drawn
`DayR_LGR10`	Guardrail	DayR_GR10 → DayR_GR1	drawn
`DayR_LGRa`	Guardrail	DayR_GR3 → DayR_GR5	drawn
`DayR_LGRb`	Guardrail	DayR_GR5 → DayR_GR7	drawn
`DayR_LGRc`	Guardrail	DayR_GR2 → DayR_GR8	drawn
`DayR_LDF`	Daylight	DayR_GW → DayR_DL	drawn
`LaneL_L1`	Top,Pave	LaneL_P1 → LaneL_P2	drawn
`LaneL_L2`	Pave1	LaneL_P3 → LaneL_P7	drawn
`LaneL_L3`	Pave2	LaneL_P4 → LaneL_P8	drawn
`LaneL_L4`	Base	LaneL_P5 → LaneL_P9	drawn
`LaneL_L5`	Datum,SubBase	LaneL_P6 → LaneL_P10	drawn
`CurbL_L1`	Curb,Top	CurbL_P1 → CurbL_P2	drawn
`CurbL_L2`	Curb,Top	CurbL_P2 → CurbL_P3	drawn
`CurbL_L3`	Curb,Top	CurbL_P3 → CurbL_P4	drawn
`CurbL_L4`	—	CurbL_P4 → CurbL_P5	drawn
`CurbL_L5`	Datum	CurbL_P5 → CurbL_P6	drawn
`CurbL_L6`	—	CurbL_P6 → CurbL_P1	drawn
`CurbL_L7`	—	CurbL_P6 → CurbL_P5	drawn
`CurbL_L8`	—	CurbL_P5 → CurbL_P9	drawn
`CurbL_L9`	—	CurbL_P9 → CurbL_P8	drawn
`CurbL_L10`	Datum,SubBase	CurbL_P8 → CurbL_P7	drawn
`CurbL_L11`	—	CurbL_P7 → CurbL_P6	drawn
`WalkL_L1`	Top,Datum,Sod	WalkL_P1 → WalkL_P2	drawn
`WalkL_L2`	Top,Datum,Sod	WalkL_P3 → WalkL_P4	drawn
`WalkL_S0`	Top,Sidewalk	WalkL_P2 → WalkL_P3	drawn
`WalkL_S1`	Sidewalk,Datum	WalkL_P3 → WalkL_P6	drawn
`WalkL_S2`	Sidewalk,Datum	WalkL_P6 → WalkL_P5	drawn
`WalkL_S3`	Sidewalk,Datum	WalkL_P5 → WalkL_P2	drawn
`DayL_LCS1`	Cut	DayL_P0 → DayL_CS1	drawn
`DayL_LCS2`	Cut	DayL_CS1 → DayL_CS2	drawn
`DayL_LCS3`	Cut	DayL_CS2 → DayL_CS3	drawn
`DayL_LCS4`	Cut	DayL_CS3 → DayL_CS4	drawn
`DayL_LCS5`	Cut	DayL_CS4 → DayL_CS5	drawn
`DayL_LCS6`	Cut	DayL_CS5 → DayL_CS6	drawn
`DayL_LCS7`	Cut	DayL_CS6 → DayL_CS7	drawn
`DayL_LCS8`	Cut	DayL_CS7 → DayL_CS8	drawn
`DayL_RGCSA`	Daylight	DayL_CS8 → DayL_DL	drawn
`DayL_RGCRA`	Daylight	DayL_CS8 → DayL_RGC_t1	drawn
`DayL_RGCPA1`	Daylight	DayL_CS8 → DayL_RGC_p1	drawn
`DayL_LFS1`	Fill	DayL_P0 → DayL_FS1	drawn
`DayL_LFS2`	Fill	DayL_FS1 → DayL_FS2	drawn
`DayL_LFS3`	Fill	DayL_FS2 → DayL_FS3	drawn
`DayL_LGW`	Guardrail	DayL_FS3 → DayL_GW	drawn
`DayL_LGR1`	Guardrail	DayL_GR1 → DayL_GR2	drawn
`DayL_LGR2`	Guardrail	DayL_GR2 → DayL_GR3	drawn
`DayL_LGR3`	Guardrail	DayL_GR3 → DayL_GR4	drawn
`DayL_LGR4`	Guardrail	DayL_GR4 → DayL_GR5	drawn
`DayL_LGR5`	Guardrail	DayL_GR5 → DayL_GR6	drawn
`DayL_LGR6`	Guardrail	DayL_GR6 → DayL_GR7	drawn
`DayL_LGR7`	Guardrail	DayL_GR7 → DayL_GR8	drawn
`DayL_LGR8`	Guardrail	DayL_GR8 → DayL_GR9	drawn
`DayL_LGR9`	Guardrail	DayL_GR9 → DayL_GR10	drawn
`DayL_LGR10`	Guardrail	DayL_GR10 → DayL_GR1	drawn
`DayL_LGRa`	Guardrail	DayL_GR3 → DayL_GR5	drawn
`DayL_LGRb`	Guardrail	DayL_GR5 → DayL_GR7	drawn
`DayL_LGRc`	Guardrail	DayL_GR2 → DayL_GR8	drawn
`DayL_LDF`	Daylight	DayL_GW → DayL_DL	drawn

Shapes (materials)

Shape	Material code	Boundary points
`LaneR_S1`	Pave1	LaneR_P1, LaneR_P2, LaneR_P7, LaneR_P3
`LaneR_S2`	Pave2	LaneR_P3, LaneR_P7, LaneR_P8, LaneR_P4
`LaneR_S3`	Base	LaneR_P4, LaneR_P8, LaneR_P9, LaneR_P5
`LaneR_S4`	SubBase	LaneR_P5, LaneR_P9, LaneR_P10, LaneR_P6
`CurbR_S1`	Curb	CurbR_P1, CurbR_P2, CurbR_P3, CurbR_P4, CurbR_P5, CurbR_P6
`CurbR_S2`	SubBase	CurbR_P6, CurbR_P5, CurbR_P9, CurbR_P8, CurbR_P7
`WalkR_SW`	Sidewalk	WalkR_P2, WalkR_P3, WalkR_P6, WalkR_P5
`LaneL_S1`	Pave1	LaneL_P1, LaneL_P2, LaneL_P7, LaneL_P3
`LaneL_S2`	Pave2	LaneL_P3, LaneL_P7, LaneL_P8, LaneL_P4
`LaneL_S3`	Base	LaneL_P4, LaneL_P8, LaneL_P9, LaneL_P5
`LaneL_S4`	SubBase	LaneL_P5, LaneL_P9, LaneL_P10, LaneL_P6
`CurbL_S1`	Curb	CurbL_P1, CurbL_P2, CurbL_P3, CurbL_P4, CurbL_P5, CurbL_P6
`CurbL_S2`	SubBase	CurbL_P6, CurbL_P5, CurbL_P9, CurbL_P8, CurbL_P7
`WalkL_SW`	Sidewalk	WalkL_P2, WalkL_P3, WalkL_P6, WalkL_P5

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.