yucad3d
Help / User Guide / Subassemblies / Retain Wall To Low Side

Retain Wall To Low Side

C3D RetainWallToLowSide — battered stem on a flush-face footing spanning to the high side

At a glance

KindSubassembly (composed into an assembly)
DomainRoad
Civil 3D equivalentRetainWallToLowSide
Geometry25 points, 28 links, 4 shapes
Conditional geometry24 of the points are created inside a branch — which ones appear depends on the parameters and the target surface
Targets1 (surface / offset / elevation targets this subassembly can be linked to)

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

ParameterTypeDefaultMeaning
Side+1 right of the baseline, −1 leftRight (+1)+1 Right / -1 Left
WallTopWidthnumber (metres unless the description says otherwise)0.292Stem width at the top (m)
TopHeightnumber (metres unless the description says otherwise)0.4Stem above the attach in fill (m)
FootingCovernumber (metres unless the description says otherwise)0.5Cover over the footing (m)
Keynumber (metres unless the description says otherwise)11 = shear key under the footing
Fillnumber (metres unless the description says otherwise)11 = fill wall (runtime: target probe decides)
WallHeightnumber (metres unless the description says otherwise)0Total wall height; 0 = auto (3 x FootingCover)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

PointCodePlacedFromExpression
P1RW_Frontplaced at the attachment point (an absolute offset/elevation)—0 / 0
P2 conditionalRW_Topoffset + elevation delta from the reference pointP1Side*TopHeight*SL / TopHeight
P3 conditionalRW_Backoffset + elevation delta from the reference pointP2Side*WallTopWidth / 0
P14 conditionalRW_Hingeoffset + elevation delta from the reference pointP30 / 0-(TopHeight+WH-FootingCover)
P5 conditionalRW_Outsideoffset + elevation delta from the reference pointP140 / 0-FootingCover
P6 conditionalRWall_B1offset + elevation delta from the reference pointP50 / 0-FD
P11 conditionalRWall_B4offset + elevation delta from the reference pointP60-Side*FW / 0
P12 conditionalRW_Insideoffset + elevation delta from the reference pointP110 / FD
P13 conditional—offset + elevation delta from the reference pointP12Side*(FW-WallTopWidth-(TopHeight+WH)*SL) / 0
P7 conditionalRWall_B2offset + elevation delta from the reference pointP60-Side*(FW/2-FK) / 0
P8 conditionalRWall_K1offset + elevation delta from the reference pointP70 / 0-FK
P9 conditionalRWall_K2offset + elevation delta from the reference pointP80-Side*2*FK / 0
P10 conditionalRWall_B3offset + elevation delta from the reference pointP90 / FK
Q2 conditionalRW_Topoffset + elevation delta from the reference pointP10 / TopHeight+WH-FootingCover
Q3 conditionalRW_Backoffset + elevation delta from the reference pointQ2Side*WallTopWidth / 0
Q14 conditionalRW_Hingeoffset + elevation delta from the reference pointQ3Side*TopHeight*SL / 0-TopHeight
Q4 conditional—offset + elevation delta from the reference pointQ14Side*WH*SL / 0-WH
Q5 conditionalRW_Outsideoffset + elevation delta from the reference pointQ4Side*(FW-WallTopWidth-(TopHeight+WH)*SL) / 0
Q6 conditionalRWall_B1offset + elevation delta from the reference pointQ50 / 0-FD
Q12 conditionalRW_Insideoffset + elevation delta from the reference pointP10 / 0-FootingCover
Q11 conditionalRWall_B4offset + elevation delta from the reference pointQ120 / 0-FD
Q10 conditionalRWall_B3offset + elevation delta from the reference pointQ11Side*(FW/2-FK) / 0
Q9 conditionalRWall_K2offset + elevation delta from the reference pointQ100 / 0-FK
Q8 conditionalRWall_K1offset + elevation delta from the reference pointQ9Side*2*FK / 0
Q7 conditionalRWall_B2offset + elevation delta from the reference pointQ80 / FK

Links

LinkCodeBetweenRole
L1Top,WallP1 → P2drawn
L2Top,WallP2 → P3drawn
L3Top,WallP3 → P14drawn
L7—P14 → P5drawn
L9—P5 → P6drawn
L10—P11 → P12drawn
L11—P12 → P13drawn
L12—P13 → P1drawn
L4Footing_BottomP6 → P7drawn
L13—P7 → P8drawn
L5Footing_BottomP8 → P9drawn
L14—P9 → P10drawn
L6Footing_BottomP10 → P11drawn
L4oFooting_BottomP6 → P11drawn
M1Top,WallP1 → Q2drawn
M2Top,WallQ2 → Q3drawn
M3Top,WallQ3 → Q14drawn
M7—Q14 → Q4drawn
M8—Q4 → Q5drawn
M9—Q5 → Q6drawn
M10—Q11 → Q12drawn
M12—Q12 → P1drawn
M4Footing_BottomQ6 → Q7drawn
M13—Q7 → Q8drawn
M5Footing_BottomQ8 → Q9drawn
M14—Q9 → Q10drawn
M6Footing_BottomQ10 → Q11drawn
M4oFooting_BottomQ6 → Q11drawn

Shapes (materials)

ShapeMaterial codeBoundary points
S1RWallP1, P2, P3, P14, P5, P6, P7, P8, P9, P10, P11, P12, P13
S1oRWallP1, P2, P3, P14, P5, P6, P11, P12, P13
S2RWallP1, Q2, Q3, Q14, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12
S2oRWallP1, Q2, Q3, Q14, Q4, Q5, Q6, Q11, Q12

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.