Median Raised With Crown
C3D MedianRaisedWithCrown — crowned raised median to the MP mark
At a glance
| |
|---|
| Kind | Subassembly (composed into an assembly) |
| Domain | Road |
| Civil 3D equivalent | MedianRaisedWithCrown |
| Geometry | 6 points, 6 links, 2 shapes |
| Conditional geometry | 5 of the points are created inside a branch — which ones appear depends on the parameters and the target surface |
Parameters
Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.
| Parameter | Type | Default | Meaning |
|---|
Side | +1 right of the baseline, −1 left | Right (+1) | +1 Right / -1 Left |
Depth | number (metres unless the description says otherwise) | 0.1 | Median slab depth (m) |
Slope1 | cross slope as a ratio (−0.02 = 2 % fall) | -0.02 | Near-edge → crown slope |
Slope2 | cross slope as a ratio (−0.02 = 2 % fall) | -0.02 | Crown → far-edge slope |
MedianOffset | number (metres unless the description says otherwise) | 3.6 | Median width when MP is unset (m) |
Points
Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.
| Point | Code | Placed | From | Expression |
|---|
P0 | — | placed at the attachment point (an absolute offset/elevation) | — | 0 / 0 |
PC conditional | Crown | offset + elevation delta from the reference point | P0 | Side*CX / -Slope1*CX |
PF conditional | — | offset + elevation delta from the reference point | P0 | Side*W / DZ |
B0 conditional | — | offset + elevation delta from the reference point | P0 | 0 / -Depth |
BC conditional | — | offset + elevation delta from the reference point | PC | 0 / -Depth |
BF conditional | — | offset + elevation delta from the reference point | PF | 0 / -Depth |
Links
| Link | Code | Between | Role |
|---|
LT1 | Top,Median | P0 → PC | drawn |
LT2 | Top,Median | PC → PF | drawn |
LE | — | PF → BF | drawn |
LB1 | Datum | BF → BC | drawn |
LB2 | Datum | BC → B0 | drawn |
LN | — | B0 → P0 | drawn |
Shapes (materials)
| Shape | Material code | Boundary points |
|---|
S1 | Median | P0, PC, BC, B0 |
S2 | Median | PC, PF, BF, BC |
Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.