Link To Marked Point 2
C3D LinkToMarkedPoint2 — cross-baseline marked-point link
At a glance
| Kind | Subassembly (composed into an assembly) |
| Domain | Road |
| Civil 3D equivalent | LinkToMarkedPoint2 |
| Geometry | 2 points, 1 links, 0 shapes |
| Conditional geometry | 1 of the points are created inside a branch — which ones appear depends on the parameters and the target surface |
Parameters
Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.
| Parameter | Type | Default | Meaning |
|---|---|---|---|
OmitLink | number (metres unless the description says otherwise) | 0 | 1 = points only, no link |
Points
Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.
| Point | Code | Placed | From | Expression |
|---|---|---|---|---|
P0 | — | placed at the attachment point (an absolute offset/elevation) | — | 0 / 0 |
P1 conditional | — | offset + elevation delta from the reference point | P0 | if(Mark.MP.IsValid, Mark.MP.Offset - P0.Offset, 0) / if(Mark.MP.IsValid, Mark.MP.Y - P0.Y, 0) |
Links
| Link | Code | Between | Role |
|---|---|---|---|
L1 | Top,Datum | P0 → P1 | drawn |
Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.