Lane Parabolic

C3D LaneParabolic — parabolic-crown lane, 4-layer

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`LaneParabolic`
Geometry	45 points, 48 links, 4 shapes

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`CrownHeight`	number (metres unless the description says otherwise)	0.1	Crown height above the flanges (m)
`Width`	number (metres unless the description says otherwise)	7.2	Full lane width (m)
`Pave1Depth`	number (metres unless the description says otherwise)	0.025	Pave1 depth (m)
`Pave2Depth`	number (metres unless the description says otherwise)	0.025	Pave2 depth (m)
`BaseDepth`	number (metres unless the description says otherwise)	0.15	Base depth (m)
`SubBaseDepth`	number (metres unless the description says otherwise)	0.3	Sub-base depth (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`R0_0`	ETW	placed at the attachment point (an absolute offset/elevation)	—	`-0.5Width / -1CrownHeight`
`R0_1`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.375Width / -0.5625CrownHeight`
`R0_2`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.25Width / -0.25CrownHeight`
`R0_3`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.125Width / -0.0625CrownHeight`
`R0_4`	Crown	placed at the attachment point (an absolute offset/elevation)	—	`0Width / -0CrownHeight`
`R0_5`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.125Width / -0.0625CrownHeight`
`R0_6`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.25Width / -0.25CrownHeight`
`R0_7`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.375Width / -0.5625CrownHeight`
`R0_8`	ETW	placed at the attachment point (an absolute offset/elevation)	—	`0.5Width / -1CrownHeight`
`R1_0`	ETW_Pave1	placed at the attachment point (an absolute offset/elevation)	—	`-0.5Width / -1CrownHeight-(Pave1Depth)`
`R1_1`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.375Width / -0.5625CrownHeight-(Pave1Depth)`
`R1_2`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.25Width / -0.25CrownHeight-(Pave1Depth)`
`R1_3`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.125Width / -0.0625CrownHeight-(Pave1Depth)`
`R1_4`	—	placed at the attachment point (an absolute offset/elevation)	—	`0Width / -0CrownHeight-(Pave1Depth)`
`R1_5`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.125Width / -0.0625CrownHeight-(Pave1Depth)`
`R1_6`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.25Width / -0.25CrownHeight-(Pave1Depth)`
`R1_7`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.375Width / -0.5625CrownHeight-(Pave1Depth)`
`R1_8`	ETW_Pave1	placed at the attachment point (an absolute offset/elevation)	—	`0.5Width / -1CrownHeight-(Pave1Depth)`
`R2_0`	ETW_Pave2	placed at the attachment point (an absolute offset/elevation)	—	`-0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_1`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_2`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_3`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_4`	—	placed at the attachment point (an absolute offset/elevation)	—	`0Width / -0CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_5`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_6`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_7`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth)`
`R2_8`	ETW_Pave2	placed at the attachment point (an absolute offset/elevation)	—	`0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth)`
`R3_0`	ETW_Base	placed at the attachment point (an absolute offset/elevation)	—	`-0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_1`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_2`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_3`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_4`	—	placed at the attachment point (an absolute offset/elevation)	—	`0Width / -0CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_5`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_6`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_7`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R3_8`	ETW_Base	placed at the attachment point (an absolute offset/elevation)	—	`0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth)`
`R4_0`	ETW_SubBase	placed at the attachment point (an absolute offset/elevation)	—	`-0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_1`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_2`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_3`	—	placed at the attachment point (an absolute offset/elevation)	—	`-0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_4`	—	placed at the attachment point (an absolute offset/elevation)	—	`0Width / -0CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_5`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.125Width / -0.0625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_6`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.25Width / -0.25CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_7`	—	placed at the attachment point (an absolute offset/elevation)	—	`0.375Width / -0.5625CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`
`R4_8`	ETW_SubBase	placed at the attachment point (an absolute offset/elevation)	—	`0.5Width / -1CrownHeight-(Pave1Depth+Pave2Depth+BaseDepth+SubBaseDepth)`

Links

Link	Code	Between	Role
`LR0_0`	Top,Pave	R0_0 → R0_1	drawn
`LR0_1`	Top,Pave	R0_1 → R0_2	drawn
`LR0_2`	Top,Pave	R0_2 → R0_3	drawn
`LR0_3`	Top,Pave	R0_3 → R0_4	drawn
`LR0_4`	Top,Pave	R0_4 → R0_5	drawn
`LR0_5`	Top,Pave	R0_5 → R0_6	drawn
`LR0_6`	Top,Pave	R0_6 → R0_7	drawn
`LR0_7`	Top,Pave	R0_7 → R0_8	drawn
`LR1_0`	Pave1	R1_0 → R1_1	drawn
`LR1_1`	Pave1	R1_1 → R1_2	drawn
`LR1_2`	Pave1	R1_2 → R1_3	drawn
`LR1_3`	Pave1	R1_3 → R1_4	drawn
`LR1_4`	Pave1	R1_4 → R1_5	drawn
`LR1_5`	Pave1	R1_5 → R1_6	drawn
`LR1_6`	Pave1	R1_6 → R1_7	drawn
`LR1_7`	Pave1	R1_7 → R1_8	drawn
`LR2_0`	Pave2	R2_0 → R2_1	drawn
`LR2_1`	Pave2	R2_1 → R2_2	drawn
`LR2_2`	Pave2	R2_2 → R2_3	drawn
`LR2_3`	Pave2	R2_3 → R2_4	drawn
`LR2_4`	Pave2	R2_4 → R2_5	drawn
`LR2_5`	Pave2	R2_5 → R2_6	drawn
`LR2_6`	Pave2	R2_6 → R2_7	drawn
`LR2_7`	Pave2	R2_7 → R2_8	drawn
`LR3_0`	Base	R3_0 → R3_1	drawn
`LR3_1`	Base	R3_1 → R3_2	drawn
`LR3_2`	Base	R3_2 → R3_3	drawn
`LR3_3`	Base	R3_3 → R3_4	drawn
`LR3_4`	Base	R3_4 → R3_5	drawn
`LR3_5`	Base	R3_5 → R3_6	drawn
`LR3_6`	Base	R3_6 → R3_7	drawn
`LR3_7`	Base	R3_7 → R3_8	drawn
`LR4_0`	Datum,SubBase	R4_0 → R4_1	drawn
`LR4_1`	Datum,SubBase	R4_1 → R4_2	drawn
`LR4_2`	Datum,SubBase	R4_2 → R4_3	drawn
`LR4_3`	Datum,SubBase	R4_3 → R4_4	drawn
`LR4_4`	Datum,SubBase	R4_4 → R4_5	drawn
`LR4_5`	Datum,SubBase	R4_5 → R4_6	drawn
`LR4_6`	Datum,SubBase	R4_6 → R4_7	drawn
`LR4_7`	Datum,SubBase	R4_7 → R4_8	drawn
`LV0_0`	—	R0_0 → R1_0	drawn
`LV0_1`	—	R1_0 → R2_0	drawn
`LV0_2`	—	R2_0 → R3_0	drawn
`LV0_3`	—	R3_0 → R4_0	drawn
`LV8_0`	—	R0_8 → R1_8	drawn
`LV8_1`	—	R1_8 → R2_8	drawn
`LV8_2`	—	R2_8 → R3_8	drawn
`LV8_3`	—	R3_8 → R4_8	drawn

Shapes (materials)

Shape	Material code	Boundary points
`S1`	Pave1	R0_0, R0_1, R0_2, R0_3, R0_4, R0_5, R0_6, R0_7, R0_8, R1_8, R1_7, R1_6, R1_5, R1_4, R1_3, R1_2, R1_1, R1_0
`S2`	Pave2	R1_0, R1_1, R1_2, R1_3, R1_4, R1_5, R1_6, R1_7, R1_8, R2_8, R2_7, R2_6, R2_5, R2_4, R2_3, R2_2, R2_1, R2_0
`S3`	Base	R2_0, R2_1, R2_2, R2_3, R2_4, R2_5, R2_6, R2_7, R2_8, R3_8, R3_7, R3_6, R3_5, R3_4, R3_3, R3_2, R3_1, R3_0
`S4`	SubBase	R3_0, R3_1, R3_2, R3_3, R3_4, R3_5, R3_6, R3_7, R3_8, R4_8, R4_7, R4_6, R4_5, R4_4, R4_3, R4_2, R4_1, R4_0

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.