Lane Outside Super With Widening
C3D LaneOutsideSuperWithWidening — outside lane that widens on curves from the baseline radius
At a glance
| |
|---|
| Kind | Subassembly (composed into an assembly) |
| Domain | Road |
| Civil 3D equivalent | LaneOutsideSuperWithWidening |
| Geometry | 10 points, 13 links, 4 shapes |
| Targets | 2 (surface / offset / elevation targets this subassembly can be linked to) |
Parameters
Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.
| Parameter | Type | Default | Meaning |
|---|
Side | +1 right of the baseline, −1 left | Right (+1) | +1 Right / -1 Left |
Width | number (metres unless the description says otherwise) | 3.6 | Lane width before widening (m) |
DefaultSlope | cross slope as a ratio (−0.02 = 2 % fall) | -0.02 | Lane cross slope |
WheelbaseLength | number (metres unless the description says otherwise) | 10 | Design vehicle wheelbase (m) |
NumberOfTravelLanes | number (metres unless the description says otherwise) | 1 | Travel lanes the widening covers |
Pave1Depth | number (metres unless the description says otherwise) | 0.025 | Pave 1 depth (m) |
Pave2Depth | number (metres unless the description says otherwise) | 0.025 | Pave 2 depth (m) |
BaseDepth | number (metres unless the description says otherwise) | 0.1 | Base depth (m) |
SubBaseDepth | number (metres unless the description says otherwise) | 0.3 | Subbase depth (m) |
Points
Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.
| Point | Code | Placed | From | Expression |
|---|
P1 | Crown | placed at the attachment point (an absolute offset/elevation) | — | 0 / 0 |
P2 | ETW | offset + elevation delta from the reference point | P1 | Side*W / W*SL |
P3 | — | offset + elevation delta from the reference point | P1 | 0 / 0-Pave1Depth |
P4 | ETW_Pave1 | offset + elevation delta from the reference point | P2 | 0 / 0-Pave1Depth |
P5 | — | offset + elevation delta from the reference point | P3 | 0 / 0-Pave2Depth |
P6 | ETW_Pave2 | offset + elevation delta from the reference point | P4 | 0 / 0-Pave2Depth |
P7 | — | offset + elevation delta from the reference point | P5 | 0 / 0-BaseDepth |
P8 | ETW_Base | offset + elevation delta from the reference point | P6 | 0 / 0-BaseDepth |
P9 | — | offset + elevation delta from the reference point | P7 | 0 / 0-SubBaseDepth |
P10 | Lane_Sub | offset + elevation delta from the reference point | P8 | 0 / 0-SubBaseDepth |
Links
| Link | Code | Between | Role |
|---|
T1 | Top,Pave | P1 → P2 | drawn |
C0 | Pave1 | P4 → P3 | drawn |
FI0 | — | P3 → P1 | drawn |
FO0 | — | P2 → P4 | drawn |
C1 | Pave2 | P6 → P5 | drawn |
FI1 | — | P5 → P3 | drawn |
FO1 | — | P4 → P6 | drawn |
C2 | Base | P8 → P7 | drawn |
FI2 | — | P7 → P5 | drawn |
FO2 | — | P6 → P8 | drawn |
C3 | SubBase,Datum | P10 → P9 | drawn |
FI3 | — | P9 → P7 | drawn |
FO3 | — | P8 → P10 | drawn |
Shapes (materials)
| Shape | Material code | Boundary points |
|---|
S0 | Pave1 | P1, P2, P4, P3 |
S1 | Pave2 | P3, P4, P6, P5 |
S2 | Base | P5, P6, P8, P7 |
S3 | SubBase | P7, P8, P10, P9 |
Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.