Lane Outside Super Multi Layer

C3D LaneOutsideSuperMultiLayer — 9-layer SE lane, tapered subbase

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`LaneOutsideSuperMultiLayer`
Geometry	20 points, 10 links, 9 shapes

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`Width`	number (metres unless the description says otherwise)	3.6	Lane width (m)
`Pave1Depth`	number (metres unless the description says otherwise)	0.025	Pave1Depth (m)
`Pave2Depth`	number (metres unless the description says otherwise)	0.025	Pave2Depth (m)
`Pave3Depth`	number (metres unless the description says otherwise)	0.025	Pave3Depth (m)
`Base1Depth`	number (metres unless the description says otherwise)	0.1	Base1Depth (m)
`Base2Depth`	number (metres unless the description says otherwise)	0.1	Base2Depth (m)
`Base3Depth`	number (metres unless the description says otherwise)	0.1	Base3Depth (m)
`Subbase1Depth`	number (metres unless the description says otherwise)	0.3	Subbase1Depth (m)
`Subbase2Depth`	number (metres unless the description says otherwise)	0.3	Subbase2Depth (m)
`Subbase3InnerDepth`	number (metres unless the description says otherwise)	0.3	Subbase3 depth, inside (m)
`Subbase3OuterDepth`	number (metres unless the description says otherwise)	0.3	Subbase3 depth, outside (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`P1`	Crown	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P2`	ETW,Lane	horizontal delta from the reference, elevation from a slope	P1	`Side*Width / LnSlp`
`I1`	Crown_Pave1	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth)`
`O1`	ETW_Pave1	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth)`
`I2`	Crown_Pave2	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth)`
`O2`	ETW_Pave2	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth)`
`I3`	Crown_Pave3	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth)`
`O3`	ETW_Pave3	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth)`
`I4`	Crown_Base1	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth)`
`O4`	ETW_Base1	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth)`
`I5`	Crown_Base2	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth)`
`O5`	ETW_Base2	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth)`
`I6`	Crown_Base3	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth)`
`O6`	ETW_Base3	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth)`
`I7`	Crown_SubBase1	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth)`
`O7`	ETW_SubBase1	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth)`
`I8`	Crown_SubBase2	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth+Subbase2Depth)`
`O8`	ETW_SubBase2	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth+Subbase2Depth)`
`I9`	Crown_SubBase3	offset + elevation delta from the reference point	P1	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth+Subbase2Depth+Subbase3InnerDepth)`
`O9`	ETW_SubBase3	offset + elevation delta from the reference point	P2	`0 / -(Pave1Depth+Pave2Depth+Pave3Depth+Base1Depth+Base2Depth+Base3Depth+Subbase1Depth+Subbase2Depth+Subbase3OuterDepth)`

Links

Link	Code	Between	Role
`L1`	Pave1	I1 → O1	drawn
`L2`	Pave2	I2 → O2	drawn
`L3`	Pave3	I3 → O3	drawn
`L4`	Base1	I4 → O4	drawn
`L5`	Base2	I5 → O5	drawn
`L6`	Base3	I6 → O6	drawn
`L7`	SubBase1	I7 → O7	drawn
`L8`	SubBase2	I8 → O8	drawn
`L9`	Datum,SubBase	I9 → O9	drawn
`L0`	Top,Pave	P1 → P2	drawn

Shapes (materials)

Shape	Material code	Boundary points
`S1`	Pave1	P1, P2, O1, I1
`S2`	Pave2	I1, O1, O2, I2
`S3`	Pave3	I2, O2, O3, I3
`S4`	Base1	I3, O3, O4, I4
`S5`	Base2	I4, O4, O5, I5
`S6`	Base3	I5, O5, O6, I6
`S7`	SubBase1	I6, O6, O7, I7
`S8`	SubBase2	I7, O7, O8, I8
`S9`	SubBase3	I8, O8, O9, I9

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.