Lane Inside Super Layer Varying Width

C3D LaneInsideSuperLayerVaryingWidth — 10 layers, per-layer extensions

At a glance


Kind	Subassembly (composed into an assembly)
Domain	Road
Civil 3D equivalent	`LaneInsideSuperLayerVaryingWidth`
Geometry	40 points, 11 links, 10 shapes

Parameters

Defaults are the metric values the palette inserts. Every parameter can be driven by an expression or a target.

Parameter	Type	Default	Meaning
`Side`	+1 right of the baseline, −1 left	Right (+1)	+1 Right / -1 Left
`LaneWidth`	number (metres unless the description says otherwise)	3.6	Lane width (m)
`Pave1Depth`	number (metres unless the description says otherwise)	0.025	Pave1 depth (m)
`Pave2Depth`	number (metres unless the description says otherwise)	0.025	Pave2 depth (m)
`Pave2InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave2 inside extension (m)
`Pave2OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave2 outside extension (m)
`Pave3Depth`	number (metres unless the description says otherwise)	0.025	Pave3 depth (m)
`Pave3InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave3 inside extension (m)
`Pave3OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave3 outside extension (m)
`Pave4Depth`	number (metres unless the description says otherwise)	0.025	Pave4 depth (m)
`Pave4InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave4 inside extension (m)
`Pave4OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave4 outside extension (m)
`Pave5Depth`	number (metres unless the description says otherwise)	0.025	Pave5 depth (m)
`Pave5InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave5 inside extension (m)
`Pave5OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave5 outside extension (m)
`Pave6Depth`	number (metres unless the description says otherwise)	0.025	Pave6 depth (m)
`Pave6InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave6 inside extension (m)
`Pave6OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave6 outside extension (m)
`Pave7Depth`	number (metres unless the description says otherwise)	0.025	Pave7 depth (m)
`Pave7InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave7 inside extension (m)
`Pave7OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave7 outside extension (m)
`Pave8Depth`	number (metres unless the description says otherwise)	0.025	Pave8 depth (m)
`Pave8InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave8 inside extension (m)
`Pave8OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave8 outside extension (m)
`Pave9Depth`	number (metres unless the description says otherwise)	0.025	Pave9 depth (m)
`Pave9InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave9 inside extension (m)
`Pave9OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave9 outside extension (m)
`Pave10Depth`	number (metres unless the description says otherwise)	0.025	Pave10 depth (m)
`Pave10InsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave10 inside extension (m)
`Pave10OutsideExtendedWidth`	number (metres unless the description says otherwise)	0	Pave10 outside extension (m)

Points

Point codes are what feature lines, styles and quantity take-off match on — they are the contract this subassembly publishes.

Point	Code	Placed	From	Expression
`P1`	Crown	placed at the attachment point (an absolute offset/elevation)	—	`0 / 0`
`P2`	ETW,Lane	horizontal delta from the reference, elevation from a slope	P1	`Side*LaneWidth / LnSlp`
`B1i`	Crown_Pave1	offset + elevation delta from the reference point	P1	`0 / -Pave1Depth`
`B1o`	ETW_Pave1	offset + elevation delta from the reference point	P2	`0 / -Pave1Depth`
`T2i`	—	offset + elevation delta from the reference point	B1i	`-SidePave2InsideExtendedWidth / -Pave2InsideExtendedWidthLnSlp`
`T2o`	—	offset + elevation delta from the reference point	B1o	`SidePave2OutsideExtendedWidth / Pave2OutsideExtendedWidthLnSlp`
`B2i`	Crown_Pave2	offset + elevation delta from the reference point	T2i	`0 / -Pave2Depth`
`B2o`	ETW_Pave2	offset + elevation delta from the reference point	T2o	`0 / -Pave2Depth`
`T3i`	—	offset + elevation delta from the reference point	B2i	`-SidePave3InsideExtendedWidth / -Pave3InsideExtendedWidthLnSlp`
`T3o`	—	offset + elevation delta from the reference point	B2o	`SidePave3OutsideExtendedWidth / Pave3OutsideExtendedWidthLnSlp`
`B3i`	Crown_Pave3	offset + elevation delta from the reference point	T3i	`0 / -Pave3Depth`
`B3o`	ETW_Pave3	offset + elevation delta from the reference point	T3o	`0 / -Pave3Depth`
`T4i`	—	offset + elevation delta from the reference point	B3i	`-SidePave4InsideExtendedWidth / -Pave4InsideExtendedWidthLnSlp`
`T4o`	—	offset + elevation delta from the reference point	B3o	`SidePave4OutsideExtendedWidth / Pave4OutsideExtendedWidthLnSlp`
`B4i`	Crown_Pave4	offset + elevation delta from the reference point	T4i	`0 / -Pave4Depth`
`B4o`	ETW_Pave4	offset + elevation delta from the reference point	T4o	`0 / -Pave4Depth`
`T5i`	—	offset + elevation delta from the reference point	B4i	`-SidePave5InsideExtendedWidth / -Pave5InsideExtendedWidthLnSlp`
`T5o`	—	offset + elevation delta from the reference point	B4o	`SidePave5OutsideExtendedWidth / Pave5OutsideExtendedWidthLnSlp`
`B5i`	Crown_Pave5	offset + elevation delta from the reference point	T5i	`0 / -Pave5Depth`
`B5o`	ETW_Pave5	offset + elevation delta from the reference point	T5o	`0 / -Pave5Depth`
`T6i`	—	offset + elevation delta from the reference point	B5i	`-SidePave6InsideExtendedWidth / -Pave6InsideExtendedWidthLnSlp`
`T6o`	—	offset + elevation delta from the reference point	B5o	`SidePave6OutsideExtendedWidth / Pave6OutsideExtendedWidthLnSlp`
`B6i`	Crown_Pave6	offset + elevation delta from the reference point	T6i	`0 / -Pave6Depth`
`B6o`	ETW_Pave6	offset + elevation delta from the reference point	T6o	`0 / -Pave6Depth`
`T7i`	—	offset + elevation delta from the reference point	B6i	`-SidePave7InsideExtendedWidth / -Pave7InsideExtendedWidthLnSlp`
`T7o`	—	offset + elevation delta from the reference point	B6o	`SidePave7OutsideExtendedWidth / Pave7OutsideExtendedWidthLnSlp`
`B7i`	Crown_Pave7	offset + elevation delta from the reference point	T7i	`0 / -Pave7Depth`
`B7o`	ETW_Pave7	offset + elevation delta from the reference point	T7o	`0 / -Pave7Depth`
`T8i`	—	offset + elevation delta from the reference point	B7i	`-SidePave8InsideExtendedWidth / -Pave8InsideExtendedWidthLnSlp`
`T8o`	—	offset + elevation delta from the reference point	B7o	`SidePave8OutsideExtendedWidth / Pave8OutsideExtendedWidthLnSlp`
`B8i`	Crown_Pave8	offset + elevation delta from the reference point	T8i	`0 / -Pave8Depth`
`B8o`	ETW_Pave8	offset + elevation delta from the reference point	T8o	`0 / -Pave8Depth`
`T9i`	—	offset + elevation delta from the reference point	B8i	`-SidePave9InsideExtendedWidth / -Pave9InsideExtendedWidthLnSlp`
`T9o`	—	offset + elevation delta from the reference point	B8o	`SidePave9OutsideExtendedWidth / Pave9OutsideExtendedWidthLnSlp`
`B9i`	Crown_Pave9	offset + elevation delta from the reference point	T9i	`0 / -Pave9Depth`
`B9o`	ETW_Pave9	offset + elevation delta from the reference point	T9o	`0 / -Pave9Depth`
`T10i`	—	offset + elevation delta from the reference point	B9i	`-SidePave10InsideExtendedWidth / -Pave10InsideExtendedWidthLnSlp`
`T10o`	—	offset + elevation delta from the reference point	B9o	`SidePave10OutsideExtendedWidth / Pave10OutsideExtendedWidthLnSlp`
`B10i`	Crown_Pave10	offset + elevation delta from the reference point	T10i	`0 / -Pave10Depth`
`B10o`	ETW_Pave10	offset + elevation delta from the reference point	T10o	`0 / -Pave10Depth`

Links

Link	Code	Between	Role
`L1`	Pave1	B1i → B1o	drawn
`L2`	Pave2	B2i → B2o	drawn
`L3`	Pave3	B3i → B3o	drawn
`L4`	Pave4	B4i → B4o	drawn
`L5`	Pave5	B5i → B5o	drawn
`L6`	Pave6	B6i → B6o	drawn
`L7`	Pave7	B7i → B7o	drawn
`L8`	Pave8	B8i → B8o	drawn
`L9`	Pave9	B9i → B9o	drawn
`L10`	Datum,SubBase	B10i → B10o	drawn
`L0`	Top,Pave	P1 → P2	drawn

Shapes (materials)

Shape	Material code	Boundary points
`S1`	Pave1	P1, P2, B1o, B1i
`S2`	Pave2	T2i, T2o, B2o, B2i
`S3`	Pave3	T3i, T3o, B3o, B3i
`S4`	Pave4	T4i, T4o, B4o, B4i
`S5`	Pave5	T5i, T5o, B5o, B5i
`S6`	Pave6	T6i, T6o, B6o, B6i
`S7`	Pave7	T7i, T7o, B7o, B7i
`S8`	Pave8	T8i, T8o, B8o, B8i
`S9`	Pave9	T9i, T9o, B9o, B9i
`S10`	Pave10	T10i, T10o, B10o, B10i

Generated page. The tables above are read from the built-in catalogue itself (yu3d_stock_dump), so they always match the version of yucad3d you are running.