Constants

404 CAD_* preprocessor constants — command IDs, snap modes, colours, text alignment, entity types, event IDs. Numeric values match the Vecad ABI exactly.

CAD_* (5)

Constant	Value	Notes
`CAD_FALSE`	`0`
`CAD_TRUE`	`1`
`CAD_LBUTTON`	`1`
`CAD_RBUTTON`	`2`
`CAD_MBUTTON`	`4`	---- Entity types (CadEntityGetType) ---------------------------------

CAD_ANGLE_* (3)

Constant	Value	Notes
`CAD_ANGLE_DEGREE`	`0`
`CAD_ANGLE_RADIAN`	`3`
`CAD_ANGLE_GRAD`	`4`	---- Global parameters (CadSetParam / CadGetParam) -------------------

CAD_CBOX_* (5)

Constant	Value	Notes
`CAD_CBOX_LAYER`	`101`
`CAD_CBOX_COLOR`	`102`
`CAD_CBOX_LINETYPE`	`103`
`CAD_CBOX_LWEIGHT`	`104`
`CAD_CBOX_DIMSTYLE`	`105`

CAD_CCS_* (4)

Constant	Value	Notes
`CAD_CCS_LBUTTON`	`1`
`CAD_CCS_RBUTTON`	`2`
`CAD_CCS_STRING`	`3`
`CAD_CCS_ESCAPE`	`4`	---- Text alignment (CAD_TA_*) — 9-value Vecad scheme ----------------

CAD_CLEAR_* (6)

Constant	Value	Notes
`CAD_CLEAR_ALL`	`0`
`CAD_CLEAR_ENTITIES`	`1`
`CAD_CLEAR_LAYER`	`2`
`CAD_CLEAR_DELETED`	`3`
`CAD_CLEAR_SELECTED`	`4`
`CAD_CLEAR_PAGE`	`5`

CAD_CMD_* (196)

Constant	Value	Notes
`CAD_CMD_ZOOM_EXT`	`102`
`CAD_CMD_ZOOM_IN`	`103`
`CAD_CMD_ZOOM_OUT`	`104`
`CAD_CMD_ZOOM_PREV`	`105`
`CAD_CMD_ZOOM_WIN`	`106`
`CAD_CMD_ZOOM_RTIME`	`107`
`CAD_CMD_ZOOM_SEL`	`108`
`CAD_CMD_PAN_RTIME`	`111`
`CAD_CMD_PAN_POINT`	`112`
`CAD_CMD_PAN_LEFT`	`113`
`CAD_CMD_PAN_RIGHT`	`114`
`CAD_CMD_PAN_UP`	`115`
`CAD_CMD_PAN_DOWN`	`116`
`CAD_CMD_PAGE_NEXT`	`121`
`CAD_CMD_PAGE_PREV`	`122`
`CAD_CMD_PAGE_FIRST`	`123`
`CAD_CMD_PAGE_LAST`	`124`
`CAD_CMD_PAGE_SELECT`	`125`
`CAD_CMD_VIEW_TOP`	`131`
`CAD_CMD_VIEW_VPOINT`	`141`
`CAD_CMD_SW_VIEW_CURLAYER`	`142`	Draw ---------------------------------------------------------------
`CAD_CMD_DRAW_POINT`	`201`
`CAD_CMD_DRAW_LINE`	`205`
`CAD_CMD_DRAW_RAY`	`206`
`CAD_CMD_DRAW_XLINE`	`207`
`CAD_CMD_DRAW_MLINE`	`208`
`CAD_CMD_DRAW_POLYLINE`	`209`
`CAD_CMD_DRAW_POLYGON`	`210`
`CAD_CMD_DRAW_ELLIPSE`	`211`
`CAD_CMD_DRAW_RECT`	`212`
`CAD_CMD_DRAW_CIRCLE`	`220`
`CAD_CMD_DRAW_CIRC_CR`	`221`
`CAD_CMD_DRAW_CIRC_CD`	`222`
`CAD_CMD_DRAW_CIRC_2P`	`223`
`CAD_CMD_DRAW_CIRC_3P`	`224`
`CAD_CMD_DRAW_ARC`	`228`
`CAD_CMD_DRAW_ARC_3P`	`229`
`CAD_CMD_DRAW_ARC_SCE`	`230`
`CAD_CMD_DRAW_ARC_SCA`	`231`
`CAD_CMD_DRAW_ARC_SCL`	`232`
`CAD_CMD_DRAW_ARC_SEA`	`233`
`CAD_CMD_DRAW_ARC_SED`	`234`
`CAD_CMD_DRAW_ARC_SER`	`235`
`CAD_CMD_DRAW_ARC_CSE`	`236`
`CAD_CMD_DRAW_ARC_CSA`	`237`
`CAD_CMD_DRAW_ARC_CSL`	`238`
`CAD_CMD_DRAW_ARC_CONT`	`239`
`CAD_CMD_DRAW_SPLINE`	`242`
`CAD_CMD_DRAW_TEXT`	`245`
`CAD_CMD_DRAW_HATCH`	`246`
`CAD_CMD_DRAW_LEADER`	`247`
`CAD_CMD_DRAW_CENMARK`	`248`
`CAD_CMD_DRAW_MTEXT`	`249`
`CAD_CMD_DRAW_WTEXT`	`250`
`CAD_CMD_INSERT_BLOCK`	`252`
`CAD_CMD_INSERT`	`252`	alias of INSERT_BLOCK
`CAD_CMD_INSERT_IMAGE`	`253`
`CAD_CMD_INSERT_XREF`	`254`
`CAD_CMD_IMAGE_MANAGER`	`255`
`CAD_CMD_XREF_MANAGER`	`256`
`CAD_CMD_CREATE_BLOCK`	`257`
`CAD_CMD_CREATE_ATTRIB`	`258`
`CAD_CMD_DRAW_DIM_LIN`	`290`
`CAD_CMD_DRAW_DIM_ALIGN`	`291`
`CAD_CMD_DRAW_DIM_ORD`	`292`
`CAD_CMD_DRAW_DIM_RAD`	`293`
`CAD_CMD_DRAW_DIM_DIAM`	`294`
`CAD_CMD_DRAW_DIM_ANG`	`295`	Edit ---------------------------------------------------------------
`CAD_CMD_UNDO`	`301`
`CAD_CMD_REDO`	`302`
`CAD_CMD_CBCUT`	`303`
`CAD_CMD_CBCOPY`	`304`
`CAD_CMD_CBPASTE`	`305`
`CAD_CMD_ENTPROP`	`306`
`CAD_CMD_PROPERTIES`	`306`	alias of ENTPROP ("Properties" dialog)
`CAD_CMD_ERASE`	`311`
`CAD_CMD_COPY`	`312`
`CAD_CMD_MOVE`	`313`
`CAD_CMD_ROTATE`	`314`
`CAD_CMD_SCALE`	`315`
`CAD_CMD_MIRROR`	`316`
`CAD_CMD_EXPLODE`	`317`
`CAD_CMD_JOIN`	`318`
`CAD_CMD_TRIM`	`319`
`CAD_CMD_EXTEND`	`320`
`CAD_CMD_ATTEDIT`	`321`
`CAD_CMD_ATTMAN`	`322`	Snap / drafting toggles --------------------------------------------
`CAD_CMD_SNAP_NODE`	`401`
`CAD_CMD_SNAP_ENDPOINT`	`402`
`CAD_CMD_SNAP_MIDPOINT`	`403`
`CAD_CMD_SNAP_CENTER`	`404`
`CAD_CMD_SNAP_NEAREST`	`405`
`CAD_CMD_SNAP_INTER`	`406`
`CAD_CMD_SNAP_PERPEND`	`407`
`CAD_CMD_SNAP_TANGENT`	`408`
`CAD_CMD_SNAP_GRIP`	`409`
`CAD_CMD_SNAP_NONE`	`410`
`CAD_CMD_SNAP_DLG`	`411`
`CAD_CMD_SW_SHOWGRID`	`421`
`CAD_CMD_SW_SNAPGRID`	`422`
`CAD_CMD_SW_OSNAPON`	`423`
`CAD_CMD_GRID_DLG`	`425`
`CAD_CMD_POLAR_DLG`	`426`
`CAD_CMD_SW_POLARON`	`427`	Select -------------------------------------------------------------
`CAD_CMD_SEL_BYPOINT`	`501`
`CAD_CMD_SEL_BYRECT`	`502`
`CAD_CMD_SEL_BYPOLYGON`	`503`
`CAD_CMD_SEL_BYPOLYLINE`	`504`
`CAD_CMD_SEL_BYDIST`	`505`
`CAD_CMD_SEL_BYID`	`507`
`CAD_CMD_SEL_BYLAYER`	`508`
`CAD_CMD_SEL_BYTEXT`	`509`
`CAD_CMD_SEL_BYUSERDATA`	`510`	Manage nongraphical objects ----------------------------------------
`CAD_CMD_LAYER`	`801`
`CAD_CMD_LAYERS_ORDER`	`802`
`CAD_CMD_COLOR`	`803`
`CAD_CMD_LINETYPE`	`804`
`CAD_CMD_LINEWEIGHT`	`805`
`CAD_CMD_TEXTSTYLE`	`806`
`CAD_CMD_DIMSTYLE`	`807`
`CAD_CMD_PNTSTYLE`	`808`
`CAD_CMD_MLINESTYLE`	`809`
`CAD_CMD_PAGE`	`810`
`CAD_CMD_BLOCK`	`811`
`CAD_CMD_SW_LINEWEIGHT`	`812`
`CAD_CMD_SW_RASTER`	`813`	Miscellaneous ------------------------------------------------------
`CAD_CMD_PRINT`	`901`
`CAD_CMD_PRINT_NODIALOG`	`902`
`CAD_CMD_PRINTPREVIEW`	`903`
`CAD_CMD_PRINTPREVIEW_END`	`904`
`CAD_CMD_RESET`	`911`
`CAD_CMD_REGEN`	`912`
`CAD_CMD_REPEAT`	`913`
`CAD_CMD_SETFOCUS`	`914`
`CAD_CMD_SETVAR`	`915`
`CAD_CMD_HELP`	`918`
`CAD_CMD_RASTERIZE`	`942`
`CAD_CMD_OPTIONS`	`951`
`CAD_CMD_DISTANCE`	`952`
`CAD_CMD_AREA`	`953`
`CAD_CMD_CALIBRATE`	`954`
`CAD_CMD_DWGINFO`	`955`
`CAD_CMD_DRAFT_AIDS`	`956`
`CAD_CMD_AREAIP`	`963`
`CAD_CMD_DISTPLINE`	`964`
`CAD_CMD_CUSTOM`	`11000`	Active-command sub-actions (fired from the right-click popup menus while a
`CAD_CMD_PLINE_ENTER`	`261`
`CAD_CMD_PLINE_CLOSE`	`262`
`CAD_CMD_PLINE_POLYGON`	`263`
`CAD_CMD_PLINE_CANCEL`	`264`
`CAD_CMD_PLINE_UNDO`	`265`
`CAD_CMD_PLINE_ARC`	`266`
`CAD_CMD_PLINE_LINE`	`267`
`CAD_CMD_SPLINE_ENTER`	`271`
`CAD_CMD_SPLINE_CLOSE`	`272`
`CAD_CMD_SPLINE_POLYGON`	`273`
`CAD_CMD_SPLINE_CANCEL`	`274`
`CAD_CMD_SPLINE_UNDO`	`275`
`CAD_CMD_MLINE_ENTER`	`281`
`CAD_CMD_MLINE_CLOSE`	`282`
`CAD_CMD_MLINE_CANCEL`	`283`
`CAD_CMD_MLINE_UNDO`	`284`
`CAD_CMD_PLINE_INSVER`	`331`
`CAD_CMD_PLINE_DELVER`	`332`
`CAD_CMD_PLINE_EDITVER`	`333`	Xref block status (Vecad CadXrefGetStatus).
`CAD_CMD_DRAW_CIR_TAN3`	`10003`
`CAD_CMD_DRAW_LINE_ANG`	`10010`
`CAD_CMD_DRAW_LINE_HV`	`10011`
`CAD_CMD_DRAW_LINE_PAR`	`10012`
`CAD_CMD_DRAW_LINE_BIS`	`10013`
`CAD_CMD_OFFSET`	`10020`
`CAD_CMD_FILLET`	`10021`
`CAD_CMD_CHAMFER`	`10022`
`CAD_CMD_STRETCH`	`10023`
`CAD_CMD_BREAK`	`10024`
`CAD_CMD_BREAKDIVIDE`	`10025`
`CAD_CMD_MOVEROTATE`	`10026`
`CAD_CMD_REVERTDIR`	`10027`
`CAD_CMD_DELETEFREE`	`10028`
`CAD_CMD_LINEGAP`	`10029`
`CAD_CMD_LINEJOIN`	`10030`
`CAD_CMD_EXPLODETEXT`	`10031`
`CAD_CMD_MATCHPROP`	`10032`
`CAD_CMD_DIMCONTINUE`	`10033`
`CAD_CMD_DIMBASELINE`	`10034`
`CAD_CMD_PLADDNODE`	`10035`
`CAD_CMD_PLDELNODE`	`10036`
`CAD_CMD_ORDER_TOP`	`10040`
`CAD_CMD_ORDER_BOTTOM`	`10041`
`CAD_CMD_ORDER_RAISE`	`10042`
`CAD_CMD_ORDER_LOWER`	`10043`
`CAD_CMD_SEL_ALL`	`10050`
`CAD_CMD_SETRELZ`	`10051`
`CAD_CMD_BEDIT`	`10052`
`CAD_CMD_BCLOSE`	`10053`
`CAD_CMD_ORTHO`	`10060`	CadCmdUserInput status codes + text alignment.

CAD_COLOR_* (45)

Constant	Value	Notes
`CAD_COLOR_BYBLOCK`	`0`
`CAD_COLOR_RED`	`1`
`CAD_COLOR_YELLOW`	`2`
`CAD_COLOR_GREEN`	`3`
`CAD_COLOR_CYAN`	`4`
`CAD_COLOR_BLUE`	`5`
`CAD_COLOR_MAGENTA`	`6`
`CAD_COLOR_WHITE`	`7`
`CAD_COLOR_BLACK`	`248`
`CAD_COLOR_BYLAYER`	`256`	Navigator UI colours (Vecad CadApi.pas) — read via CadGetColor / set via
`CAD_COLOR_NAVBKG`	`264`
`CAD_COLOR_NAVRECT`	`265`
`CAD_COLOR_NAVBOT`	`266`
`CAD_COLOR_NAVLINE`	`267`
`CAD_COLOR_NAVTEXT`	`268`	Named ACI palette aliases (values per saper CadApi.pas).
`CAD_COLOR_GRAY`	`8`
`CAD_COLOR_LTGRAY`	`9`
`CAD_COLOR_BROWN`	`32`
`CAD_COLOR_SALAD`	`60`
`CAD_COLOR_GRAY1`	`61`
`CAD_COLOR_WHITE2`	`81`
`CAD_COLOR_OLIVE`	`91`
`CAD_COLOR_WHITE1`	`122`
`CAD_COLOR_SKYBLUE`	`143`
`CAD_COLOR_TEAL`	`144`
`CAD_COLOR_PURPLE`	`226`
`CAD_COLOR_LTMAROON`	`231`
`CAD_COLOR_LTBLACK`	`249`
`CAD_COLOR_GRAY0`	`250`
`CAD_COLOR_GRAY2`	`252`
`CAD_COLOR_GRAY3`	`253`
`CAD_COLOR_GRAY4`	`254`
`CAD_COLOR_GRAY5`	`255`	Special UI colours (palette indices; also gettable/settable via
`CAD_COLOR_WINBKG`	`0`
`CAD_COLOR_CURSOR`	`256`
`CAD_COLOR_PP_WINBKG`	`257`
`CAD_COLOR_PP_PAPER`	`258`
`CAD_COLOR_PP_WHITE`	`259`
`CAD_COLOR_PP_CURSOR`	`260`
`CAD_COLOR_SELECT`	`261`
`CAD_COLOR_GRIPS`	`262`
`CAD_COLOR_SNAPMARK`	`263`
`CAD_COLOR_AREAIN`	`269`
`CAD_COLOR_AREAOUT`	`270`
`CAD_COLOR_TRANSPARENT`	`1687050`	---- Navigator (CadNavGetParam Prm / CadNavCreate Flags) -------------

CAD_DIM_* (9)

Constant	Value	Notes
`CAD_DIM_HOR`	`1`
`CAD_DIM_VER`	`2`
`CAD_DIM_ALIGNED`	`3`
`CAD_DIM_ORDX`	`4`
`CAD_DIM_ORDY`	`5`
`CAD_DIM_ANGULAR`	`6`
`CAD_DIM_ANG3P`	`7`
`CAD_DIM_RADIUS`	`8`
`CAD_DIM_DIAMETER`	`9`	---- Polyline kinds (CadAddPolyline) ---------------------------------

CAD_ENT_* (20)

Constant	Value	Notes
`CAD_ENT_POINT`	`1`
`CAD_ENT_LINE`	`2`
`CAD_ENT_POLYLINE`	`3`
`CAD_ENT_ARC`	`4`
`CAD_ENT_TEXT`	`5`
`CAD_ENT_INSBLOCK`	`6`
`CAD_ENT_SHAPE`	`7`
`CAD_ENT_3DFACE`	`8`
`CAD_ENT_SOLID`	`9`
`CAD_ENT_IMAGE`	`10`
`CAD_ENT_DIM`	`11`
`CAD_ENT_HATCH`	`12`
`CAD_ENT_LEADER`	`13`
`CAD_ENT_MLINE`	`14`
`CAD_ENT_VPORT`	`15`
`CAD_ENT_ATTRIB`	`17`
`CAD_ENT_RECT`	`18`
`CAD_ENT_MTEXT`	`19`
`CAD_ENT_WINTEXT`	`20`
`CAD_ENT_CUSTOM`	`77`	---- Dimension types (CadAddDim) -------------------------------------

CAD_GL_* (50)

Constant	Value	Notes
`CAD_GL_SHOWSYSCURSOR`	`1`
`CAD_GL_CROSSSIZE`	`2`
`CAD_GL_SHOWCROSS`	`3`
`CAD_GL_CURVEQUALITY`	`4`
`CAD_GL_CHARQUALITY`	`5`
`CAD_GL_MINCHARSIZE`	`6`
`CAD_GL_MINCHARFSIZE`	`7`
`CAD_GL_MINENTSIZE`	`8`
`CAD_GL_DRAWSTEP`	`9`
`CAD_GL_MITERLIMIT`	`10`
`CAD_GL_AUTOSEL`	`11`
`CAD_GL_AUTOSELRECT`	`12`
`CAD_GL_SELSHIFTADD`	`13`
`CAD_GL_SELINSIDE`	`14`
`CAD_GL_SELBYLAYER`	`15`
`CAD_GL_UNSELAFTEREDIT`	`16`
`CAD_GL_SELLINE`	`17`
`CAD_GL_PICKBOXSIZE`	`18`
`CAD_GL_USEGRIPS`	`19`
`CAD_GL_GRIPSIZE`	`20`
`CAD_GL_IMAGEBORDER`	`21`
`CAD_GL_DXFDECPREC`	`22`
`CAD_GL_DXFVER`	`23`
`CAD_GL_DWGVER`	`24`
`CAD_GL_ANGUNITS`	`25`
`CAD_GL_FILEEXT`	`26`
`CAD_GL_SHOWEMPTY`	`27`
`CAD_GL_BLINKTIME`	`28`
`CAD_GL_NAVRTIME`	`29`
`CAD_GL_ENUMDELENTS`	`30`
`CAD_GL_ACADCONVERT`	`31`
`CAD_GL_FASTCURSOR`	`32`
`CAD_GL_DELSCROLLBARS`	`33`
`CAD_GL_SHOWEMPTYBLKS`	`34`
`CAD_GL_GETINVISIBLE`	`35`
`CAD_GL_SELINPLINE`	`36`
`CAD_GL_SELDRAWHATCH`	`37`
`CAD_GL_SNAPSHOWAPER`	`38`
`CAD_GL_SNAPSHOWMARK`	`39`
`CAD_GL_SNAPAPERSIZE`	`40`
`CAD_GL_SNAPMARKSIZE`	`41`
`CAD_GL_SMOOTHSCROLL`	`42`
`CAD_GL_SHOWCOMPASS`	`43`
`CAD_GL_EXTMARGIN`	`44`
`CAD_GL_MBUTTONPAN`	`45`
`CAD_GL_IMPDIMASBLOCK`	`46`
`CAD_GL_IMPHATCHEXPLODE`	`47`
`CAD_GL_NOACADWARNING`	`48`
`CAD_GL_HIDESOMEPROPS`	`51`
`CAD_GL_PRNUSEDOC`	`52`	---- Built-in popup menus (CadMenuClear / CadMenuAdd) ----------------

CAD_LWEIGHT_* (10)

Constant	Value	Notes
`CAD_LWEIGHT_DEFAULT`	`(-3)`
`CAD_LWEIGHT_BYBLOCK`	`(-2)`
`CAD_LWEIGHT_BYLAYER`	`(-1)`
`CAD_LWEIGHT_000`	`0`
`CAD_LWEIGHT_020`	`20`
`CAD_LWEIGHT_025`	`25`
`CAD_LWEIGHT_030`	`30`
`CAD_LWEIGHT_035`	`35`
`CAD_LWEIGHT_040`	`40`
`CAD_LWEIGHT_050`	`50`	---- Paper orientation / clear modes / angle units -------------------

CAD_MENU_* (13)

Constant	Value	Notes
`CAD_MENU_PRINTPREVIEW`	`1`
`CAD_MENU_EDIT`	`2`
`CAD_MENU_DEFAULT`	`3`
`CAD_MENU_POLYLINE`	`4`
`CAD_MENU_SPLINE`	`5`
`CAD_MENU_MLINE`	`6`
`CAD_MENU_PLINEEDIT`	`7`
`CAD_MENU_SNAP`	`8`
`CAD_MENU_PROFEDIT`	`9`	=== yucad extras (LibreCAD-derived; NOT genuine Vecad) ==============
`CAD_MENU_PRINTPREVIEW`	`1`
`CAD_MENU_EDIT`	`2`
`CAD_MENU_DEFAULT`	`3`
`CAD_MENU_SNAP`	`8`	---- Object-snap modes (CadSnapPutMode bitmask) ----------------------

CAD_NAV_* (8)

Constant	Value	Notes
`CAD_NAV_LEFT`	`0`
`CAD_NAV_TOP`	`1`
`CAD_NAV_WIDTH`	`2`
`CAD_NAV_HEIGHT`	`3`
`CAD_NAV_EXIST`	`4`
`CAD_NAV_CHILD`	`256`
`CAD_NAV_SUNKEN`	`512`
`CAD_NAV_CPANEL`	`1024`	---- Lineweights -----------------------------------------------------

CAD_PAPER_* (2)

Constant	Value	Notes
`CAD_PAPER_BOOK`	`1`
`CAD_PAPER_ALBUM`	`2`

CAD_PLINE_* (5)

Constant	Value	Notes
`CAD_PLINE_LINEAR`	`0`
`CAD_PLINE_QUAD`	`5`
`CAD_PLINE_CUBIC`	`6`
`CAD_PLINE_BEZIER`	`8`
`CAD_PLINE_SPLINE`	`99`	---- ACI colours -----------------------------------------------------

CAD_SNAP_* (10)

Constant	Value	Notes
`CAD_SNAP_NODE`	`1`
`CAD_SNAP_ENDPOINT`	`2`
`CAD_SNAP_MIDPOINT`	`4`
`CAD_SNAP_CENTER`	`8`
`CAD_SNAP_NEAREST`	`16`
`CAD_SNAP_INTER`	`32`
`CAD_SNAP_PERPEND`	`64`
`CAD_SNAP_TANGENT`	`128`
`CAD_SNAP_GRIP`	`256`
`CAD_SNAP_ALL`	`511`	---- Localization string identifiers (CadSetString / CadGetVBString) --

CAD_TA_* (9)

Constant	Value	Notes
`CAD_TA_BOTLEFT`	`0`
`CAD_TA_BOTCENTER`	`1`
`CAD_TA_BOTRIGHT`	`2`
`CAD_TA_MIDLEFT`	`3`
`CAD_TA_MIDCENTER`	`4`
`CAD_TA_MIDRIGHT`	`5`
`CAD_TA_TOPLEFT`	`6`
`CAD_TA_TOPCENTER`	`7`
`CAD_TA_TOPRIGHT`	`8`	---- Booleans / mouse buttons ----------------------------------------

CAD_XREF_* (4)

Constant	Value	Notes
`CAD_XREF_NOXREF`	`0`
`CAD_XREF_LOADED`	`1`
`CAD_XREF_NOTLOADED`	`2`
`CAD_XREF_NOTFOUND`	`3`	Right-click popup menu IDs (Vecad CadMenuClear / CadMenuAdd).